|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-21-2019, 06:39 AM | #11 | |
Gone Wild
Join Date: Jul 2018
Location: Central Ohio
Posts: 1,720
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
I can't remember which ones at the moment. I'll edit this post if I find it before someone else tells you which cables to swap. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-21-2019, 06:43 AM | #12 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Identify The Wires (Alltrax Upgrade)
There are two different ways to orient the F1/F2 and A1/A2 terminations to make the cart go the correct direction as indicated by the Fwd/Rev switch:
Controller B+ to Motor A1 and Controller M- (J9) to Motor A2. Then Controller F1 (J7) to Motor F1 and Controller F2 (J8 to Motor F2. Controller B+ to Motor A2 and Controller M- (J9) to Motor A1. Then Controller F1 (J7) to Motor F2 and Controller F2 (J8 to Motor F1. |
09-21-2019, 10:40 AM | #13 | |
Not Yet Wild
Join Date: Sep 2019
Posts: 47
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
Sent from my SM-G975U using Tapatalk |
|
09-21-2019, 10:41 AM | #14 | |
Not Yet Wild
Join Date: Sep 2019
Posts: 47
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
Sent from my SM-G975U using Tapatalk |
|
09-21-2019, 10:59 AM | #15 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Identify The Wires (Alltrax Upgrade)
You only need to move two motor cables to correct the issue, but since you are working on the motor make sure to use two wrenchs to prevent the nut closets to the motor from rotating.
|
09-21-2019, 11:02 AM | #16 | |
Not Yet Wild
Join Date: Sep 2019
Posts: 47
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
Sent from my SM-G975U using Tapatalk |
|
09-21-2019, 11:05 AM | #17 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Identify The Wires (Alltrax Upgrade)
I meant to say keep the motor post from rotating as there are wires connected to them inside the motor that can get disconnected.
|
09-21-2019, 11:06 AM | #18 | |
Not Yet Wild
Join Date: Sep 2019
Posts: 47
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
Sent from my SM-G975U using Tapatalk |
|
09-21-2019, 11:51 AM | #19 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Identify The Wires (Alltrax Upgrade)
Your existing configuration matches one of those two sets in the Armature or Field, so you only have to change the other set.
Just swap the field wires on the motor. |
09-21-2019, 11:54 AM | #20 | |
Not Yet Wild
Join Date: Sep 2019
Posts: 47
|
Re: Identify The Wires (Alltrax Upgrade)
Quote:
Sent from my SM-G975U using Tapatalk |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Help identify mystery wires 48v TXT | Electric EZGO | |||
FS: Club Car DS Alltrax 4834 / Solenoid / Wires | Golf Carts and Parts | |||
Help Identify Two Broken Wires (99 DS 48v) | Electric Club Car | |||
Two wires on the alltrax to go | Electric Club Car | |||
Which wires to Upgrade to 2 Gauge | Electric Club Car |