XCT300 on IQ, stuttering during regen and not faster than stock

sonofagunn · 10-07-2018, 10:31 AM

Quote:

Originally Posted by scottyb

Uncheck the speed limit box and SET or save changes.
If this increases speed there is a problem with the speed sensor
What yr cart do you have and what motor map is installed in the controller?

It's a 2005 IQ (if I'm interpreting the serial # correctly, it starts with AQ05).

WalterM6 · 10-07-2018, 10:32 AM

1sharphook Would you mind copying and pasting that for me. I've never seen a accurate description. "Max Regen Battery Amps" refers to how much current the batteries will put out to stop a moving cart. "Max Regen Armature Amps" refers to how much current the armature will put out to stop a moving cart. The manual tells you to adjust them both the same. I don't want braking when I let up on the throttle so I adjust the regen armature to zero. I do want rollaway braking so I don't see my cart rolling away in the Publix parking lot. I adjust it to 40 amps.

10-07-2018, 10:41 AM

Quote:

Originally Posted by WalterM6

1sharphook Would you mind copying and pasting that for me.

http://lmgtfy.com/?q=alltrax+toolkit+instruction

sonofagunn · 10-07-2018, 10:44 AM

I have attached my controller settings.

controllersettings1.jpg

controllersettings2.jpg

scottyb · 10-07-2018, 10:50 AM

And which motor is in the cart ?
Also is the throttle progress bar going to 100% in the monitor?

sonofagunn · 10-07-2018, 10:51 AM

It's a GE motor.

sonofagunn · 10-07-2018, 10:51 AM

Quote:

Originally Posted by scottyb

And which motor is in the cart ?
Also is the throttle progress bar going to 100% in the monitor?

It's a GE motor.

scottyb · 10-07-2018, 10:51 AM

Quote:

Originally Posted by scottyb

And which motor is in the cart ?
Also is the throttle progress bar going to 100% in the monitor?

And the second Q?

sonofagunn · 10-07-2018, 10:56 AM

Throttle does go to 100%. I unchecked "Enable Speed Limit" (and pressed SET) and it didn't make a noticeable difference.

I should also add that there is a whine/hum coming from the motor when first starting out, and for a few seconds after coming to a stop.

I should also add that I had to switch f1 and f2 at the motor because forward and reverse were switched when it was wired per the diagram that came with the controller.

Sergio · 10-07-2018, 11:33 AM

Since it is a common upgrade, did You by any chance ever installed a speed magnet on your motor?

If so, change the pole setting to 4.

If not, what is the max rpm your cart is achieving if you run the monitor while driving?

10-07-2018, 10:32 AM	#12
WalterM6 Gone Wild Join Date: Apr 2017 Location: SE TN Posts: 2,226	Re: XCT300 on IQ, stuttering during regen and not faster than stock 1sharphook Would you mind copying and pasting that for me. I've never seen a accurate description. "Max Regen Battery Amps" refers to how much current the batteries will put out to stop a moving cart. "Max Regen Armature Amps" refers to how much current the armature will put out to stop a moving cart. The manual tells you to adjust them both the same. I don't want braking when I let up on the throttle so I adjust the regen armature to zero. I do want rollaway braking so I don't see my cart rolling away in the Publix parking lot. I adjust it to 40 amps.

10-07-2018, 10:44 AM	#14
sonofagunn Getting Wild Join Date: Sep 2018 Location: Palm Harbor, FL Posts: 86	Re: XCT300 on IQ, stuttering during regen and not faster than stock I have attached my controller settings. controllersettings1.jpg controllersettings2.jpg

10-07-2018, 10:50 AM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: XCT300 on IQ, stuttering during regen and not faster than stock And which motor is in the cart ? Also is the throttle progress bar going to 100% in the monitor?

10-07-2018, 10:51 AM	#16
sonofagunn Getting Wild Join Date: Sep 2018 Location: Palm Harbor, FL Posts: 86	Re: XCT300 on IQ, stuttering during regen and not faster than stock It's a GE motor.

10-07-2018, 10:56 AM	#19
sonofagunn Getting Wild Join Date: Sep 2018 Location: Palm Harbor, FL Posts: 86	Re: XCT300 on IQ, stuttering during regen and not faster than stock Throttle does go to 100%. I unchecked "Enable Speed Limit" (and pressed SET) and it didn't make a noticeable difference. I should also add that there is a whine/hum coming from the motor when first starting out, and for a few seconds after coming to a stop. I should also add that I had to switch f1 and f2 at the motor because forward and reverse were switched when it was wired per the diagram that came with the controller.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-07-2018, 11:33 AM	#20
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: XCT300 on IQ, stuttering during regen and not faster than stock Since it is a common upgrade, did You by any chance ever installed a speed magnet on your motor? If so, change the pole setting to 4. If not, what is the max rpm your cart is achieving if you run the monitor while driving?

Similar Threads
Thread	Forum
Need a Guinea Pig, Alltrax XCT300 for PowerDrive Plus (Regen 2)	Electric Club Car
what runs faster stock from the factory	Electric EZGO
ISO Club car powerdrive plus regen 2 stock 48v controller	Electric Club Car
Stock '91 - Just a little faster?	Electric EZGO
can i add a battery or 2 more to my stock cart to make it faster?	Electric EZGO