|
On Road Golf Carts! Low to the ground Golf Carts! |
|
Thread Tools | Display Modes |
04-21-2017, 04:05 AM | #11 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car - Update
It's been quite a while since I posted on this. Progress had been slow because of health issues and other projects. Now that my EV design business is closed, that takes most outside projects out of the mix.
I was trying to buy a new 2Five rear axle, to give me access to factory rear disc brakes. That ended in failure, as the 610911 part number from my 2Five Service Parts Manual is not valid. E-Z-GO provided me with a new part number, 618150, but I was unable to get my local E-Z-GO dealer to get me a price, let alone order it for me. I gave up on that and decided to just go with the Jakes hydraulic disc brake kit for the front axle. I ordered the kit last week, and it arrived 3 days ago. Bob |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2017, 09:00 AM | #12 |
STEALTH 4X4
Join Date: Sep 2011
Location: GA
Posts: 2,125
|
Re: RXV chassis based road car
Bob, I have calipers, rotors and caliper brackets for the rear axle from hydraulic brakes kits I was making. The calipers and rotors are Ausco. You would need hubs and would need to adapt to your actuation system. I don't know if the master cylinder that came with your Jakes kit would work or not. let me know if you are interested. This looks like a cool build!
|
04-21-2017, 09:01 AM | #13 |
Gone Wild
Join Date: Aug 2015
Location: Zephyrhills fl
Posts: 252
|
Re: RXV chassis based road car
This is what I have wanted to do since the first time I saw a Legend Car. I always wanted to pull up to a light in one just to make people scratch their heads. Good luck with it and I will be watching.
|
04-27-2017, 08:44 PM | #14 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
Quote:
I can get a larger bore version of the Jakes master cylinder. I think it uses the same mount, since its made by the same manufacturer. I would definitely prefer to have 4 wheel disc brakes. I have no problem doing most fabrication, as long as it's something that one person can do. Do your caliper mounts clamp around the axle tubes, or are they weld-on? The reason I had given up on rear brakes is the electric RXV axle has nothing to mount calipers to, not even drum brake flanges to bolt an adapter to. Welding on caliper mounts is not beyond my abilities, just getting them positioned right would be difficult without all of the hydraulics in place and using rotors mounted to the hubs to slip the calipers onto. It would require a helper to depress the brake pedal to hold the calipers aligned while tack-welding some home-made caliper mounts in place. Bob |
|
05-03-2017, 04:21 AM | #15 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
The struts I had installed were from my wrecked 2012 RXV, and they were not the right struts for the 2009. I used the lower strut hole, which lowered the front spindles by 1.5", giving a slight lift of the chassis front. The driver side strut was broken in the wreck and was welded back together. The alignment was fair, but not what I would want on a street car capable of 45+ MPH. I ordered a pair of brand new struts for the 2009 chassis yesterday. They are scheduled for delivery today. E-Z-GO parts has a pre-summer 20% discount running, promo code PRESUM20 so I used it. Free FedEx shipping to boot!
Bob |
05-03-2017, 09:16 PM | #16 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
The new struts arrived, so I installed them to the road car frame. All new A-Arms, A-Arm tubes, bushings, Kingpin tubes, hardware, and the new Jakes front spindles with the caliper mounts.
Here's a few pics of the installed parts. |
05-04-2017, 07:25 PM | #17 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
I had a busy day clearing trees from the roads that were downed by storms. Big trees were blowing over most of the day
I finally had the chance to install the Jakes front disc brakes on my project Road Car. Here are pics of what it looks like so far. Bob |
05-05-2017, 06:34 AM | #18 |
Gone Wild
Join Date: Aug 2015
Location: Zephyrhills fl
Posts: 252
|
Re: RXV chassis based road car
Will you take it down deals gap when finished? Looks like you are around there? Awesome project please keep the updates coming.
|
05-06-2017, 12:55 AM | #19 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
Quote:
Someone in DC decided to put me on the Presidential Advisory Board this past week. After months of advising, it was interesting to find out that one of my suggestions had made into the AHCA legislation passed by congress. |
|
05-20-2017, 08:43 PM | #20 |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: RXV chassis based road car
I'm at the point that I need the body panels in order to measure, mark, and cut the aluminum required to build the floor pan and framework that will support the body panels.
I'm planning for the trip to Charlotte NC to pick up the body panels, bumpers ,bumper extensions, windshield, ect. I bought a 48" X 55" X 3/16" plate of aluminum to fabricate a skid plate from. This skid plate will fasten to the underside of the wishbone, providing the driver with some protection from road debris. It will also provide a surface for mounting the throttle and brake pedal assemblies in their new locations. The skid plate will extend from the front of the forward leaf spring mounts, forward to the front of the car. I must dismantle everything down to the bare wishbone again in order to do this. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
what can you tell me based on serial number? | Electric EZGO | |||
Old timer-based charger: Diode(s) blown? | Electric EZGO | |||
Banshee based Drag trike | Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! | |||
Water based paints (Auto-Air) | Body and Paint |