|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-06-2013, 04:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Aroma park, il
Posts: 35
|
Good solenoid no click no go
HEY GUYS, I JUST GOT DONE REBULDING/CUSTOMIZING A YAMAHA ELECTRIC G2 AND WAS WORKING GREAT THEN JUST STOPPED. IT WOULD NOT CLICK OR GO AT ALL, SO I PUSHED STARTED IT AND WORKED FINE FOR A LITTLE BIT AND NOW IT WONT DO ANYTHING. I PUT AN EXTRA WIRE FROM THE SMALL TERMANAL ON THE SOLENOID AND TAP IT ON THE BIG POWER TERMANAL AND IT CLICKS AND GOES? I HAVE BEEN OVER ALMOST EVERY WIRE ON THIS THING AND CANT FIGURE IT OUT. I WOULD APPRCIATE ANY HELP?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-08-2013, 10:31 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Good solenoid no click no go
The small connectors at the pedal switch come loose/ get corroded. check there.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 03 48v cc solenoid will not click | Electric Club Car | |||
| Solenoid click | Electric Yamaha | |||
| tow/run solenoid click but no go | Electric Club Car | |||
| New solenoid/ No click | Electric EZGO | |||
Linear Mode
