|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-12-2017, 09:58 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 71
|
G9 engine leveling
Anyone try these with sock motor
http://www.vegascarts.com/product-p/yacb01.htm |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-12-2017, 10:17 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G9 engine leveling
It would work fine as the engine cradle itself is unaltered in the swap. There is merely an adapter plate for the VC 460.
|
11-12-2017, 11:11 PM | #3 |
Not Yet Wild
Join Date: Jun 2017
Posts: 71
|
Re: G9 engine leveling
Wasnt doing a motor swap using stock motor was going to use them to level out stock motor aftee putting a jakes 7in lift on it
|
11-13-2017, 08:12 AM | #4 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G9 engine leveling
They drop the engine cradle down in the front to level whatever engine is on an angle due to the lift.
|
11-14-2017, 09:47 PM | #5 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 engine leveling
Those are pretty sweet. Should work with any engine. When I made my clone mount I put a tube across the front to drop it, but these brackets would be nice.
|
11-14-2017, 09:52 PM | #6 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,633
|
Re: G9 engine leveling
Too bad they don't make something like that for the G14. Just too few of us.
|
11-14-2017, 09:59 PM | #7 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 engine leveling
I should make my own with setback, cut the rear bumper mounts off, and buy an expensive set of 25s and wheels. But other improvements are budgeted first lol.
|
11-15-2017, 07:00 AM | #8 |
Gone Wild
Join Date: Jul 2017
Location: East Central Missouri
Posts: 1,955
|
Re: G9 engine leveling
I've thought about the same thing with my lifted stock engine TXT. Not sure there is any advantage for me with a stock engine except to get the dipstick to read accurately again.
Sent from my Moto G (4) using Tapatalk |
11-17-2017, 12:06 PM | #9 |
Not Yet Wild
Join Date: Jun 2017
Posts: 71
|
Re: G9 engine leveling
Ill probably have to mod airbox to work or find a k&n air kit that fits srock motor
|
11-17-2017, 05:33 PM | #10 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G9 engine leveling
Not sure, that hose should bend around some to airbox, or is the box on the cradle or frame? Mine is long gone I put a car airbox in and tube to frame to mount it.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
leveling out a lifted g19? | Lifted Golf Carts | |||
Leveling out G22 | Gas Yamaha | |||
Battery Box Leveling | Electric EZGO | |||
leveling 1998 ezgo engine | Lifted Golf Carts | |||
Leveling The Rear End??? | Gas EZGO |