|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-08-2019, 06:04 PM | #1 |
Not Yet Wild
Join Date: Nov 2018
Location: Azle, TX
Posts: 47
|
electrical problems installing digital volt guage
2001 TXT Sepex / PDS- 36volt
So I bought 2 hole plate and digital volt meter to install in dash- jumpered + from meter to key switch for on/off control of meter- worked fine for testing, came on & off w/ key switch on/off. I put it all together in dash- nothing. key switch seems dead, f/r switch silent, then noticed I did not put in tow before working. took jumper off key switch but still nothing. is key switch fried? did I toast the cart? about to order new key switch. battery reads 36.7volts at terminals of all six combined. took off cover on charger port- reads 36.7 for pack voltage and looks good. oh...and now I have it in tow/maintenance. tried for reading at key switch but nothing now. suggestions from here are appreciated. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Installing digital voltmeter | Electric Club Car | |||
Digital Volt Guage doesn't match pack voltage after Alltrax install | Electric EZGO | |||
installing a digital volt meter | Electric Club Car | |||
Digital ROUND SOC guage for 48v cart, suggestions? | Electric EZGO | |||
WTB round digital 48 volt guage | Golf Carts and Parts |