|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-22-2010, 07:08 PM | #1 |
Not Yet Wild
Join Date: Sep 2010
Posts: 1
|
G9 motor rebuild problem
I am trying to rebuild my g9 motor. I had to get a new crank as the rod bearings locked up on it an crank was out of spech. I got a .50 over piston and went to get it bored out and was told it was worn so bad that i would need to go bigger. The problem is no one offers any other size pistons. Does anyone have any suggestions. Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-22-2010, 07:10 PM | #2 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: G9 motor rebuild problem
get a sleave put in the block
get a used block buy a rebuilt engine here are 2 sugestions |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G2 Motor- fresh rebuild | Golf Carts and Parts | |||
fresh rebuild problem | Gas EZGO | |||
Time to rebuild the motor! | Gas EZGO | |||
motor rebuild problem | Gas EZGO | |||
Problem with rebuild | Gas Yamaha |