![]() |
|
Lifted Golf Carts Off-Road Golf Carts. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
![]() Getting ready to order a 5in lift for my cart.Can I run 24 in. tires on this lift.???
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() no - especially on an electric in stock trim. What lift you going to use?
|
|
|
![]() |
![]() |
![]() |
#3 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
![]() The kit says it will accept a 23in tire.
|
![]() |
![]() |
![]() |
#4 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
![]() Here's a pic of a cart installed on.
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() Cart in pic has a different kit than the one shown. I would be cautious of any lift that includes spindle adaptors. The EZGO Factory lifts come with riser spindles, HD hubs, tie rods, rod ends and more. You going cheap or right on this purchase?
|
|
|
![]() |
![]() |
![]() |
#6 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
![]() Reason I am asking if my tires will fit this lift kit,,,is because I have the tires already. (24x11x10) And the lift kit is in my budget ($215) will it not work?
|
![]() |
![]() |
![]() |
#7 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() It'll probably work with 24's, depending on the rim offset. The tires may rub in the front when turning. $215.00 is a cheap kit. You get what you pay for. Factory lift's are $350.00 - I've never had one of them break. Seen plenty of the cheap ones snap in half. You get what you want - My post's are only meant to help...
|
|
|
![]() |
![]() |
![]() |
#8 |
Getting Wild
Join Date: Mar 2008
Posts: 105
|
![]() I think I'm going with a Jake's kit. Thanks for the help.
|
![]() |
![]() |
![]() |
#9 | |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() ![]() Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
![]() Nope - They go right in the scrap pile. The weakest areas on the aftermarket lifts that we have seen are where the drop axle is welded to the spindle carrier (breaks) and on those that have the spindle risers. We get alot of customers that come in with broken spindles because they snap off where the riser bolts on. Not from normal use, but from abuse, of course. Once again - I'll always post what I have seen from experience.
Just offering our experience to a fellow carter... |
|
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Electric motor question? | Electric EZGO | |||
need help with new cart-big wheels/electric system/lift | Electric Yamaha | |||
Performance Electric Carts Question | Electric Club Car | |||
Lift Kit Question | Electric Club Car | |||
lift kit and tire question | Electric Club Car |