|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-17-2008, 11:08 AM | #1 |
Gone Wild
Join Date: Sep 2008
Location: pending
Posts: 352
|
G9 won't pull and cuts out sometimes
Replaced the plugs, air filter, and its getting plenty of fuel. I can smell gas before it cuts out but don't see anything on bowl of carburator. Sprayed it out with cleaner and no change. Seems to loss power when wide open and pops sometimes. Won't pull for crap up a hill either.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-17-2008, 01:45 PM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,859
|
Re: G9 won't pull and cuts out sometimes
Check for air leaks around the air filter box: should be completely sealed. Also look at the spacer between the carb. and intake. Check your throttle cables to make sure they are adjusted so the carb. throttle completely opens and closes.
Pulling problem: Check your front motor mounts for wear for the pulling problem. Could be a bad clutch, rear clutch spring, or missing clip on the drive shaft on rearend. |
|
|
09-18-2008, 08:22 AM | #3 |
Gone Wild
Join Date: Sep 2008
Location: pending
Posts: 352
|
Re: G9 won't pull and cuts out sometimes
I'll check it out.
|
09-18-2008, 09:27 AM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G9 won't pull and cuts out sometimes
Big Block!!!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
09-19-2008, 02:41 PM | #5 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G9 won't pull and cuts out sometimes
hey new guy were did you get the fender flares for your g9, i can't seem to find any for mine
|
09-22-2008, 07:51 AM | #6 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G9 won't pull and cuts out sometimes
Quote:
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
11-11-2008, 05:42 PM | #7 |
Gone Wild
Join Date: Sep 2008
Location: pending
Posts: 352
|
Re: G9 won't pull and cuts out sometimes
Seems I never checked back in. Cart is running stout now. Thanks guys. Needed a good tuneup and kick in the @$$!
|
11-13-2008, 04:07 PM | #8 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G9 won't pull and cuts out sometimes
hey ron, did you just order 2 sets of 2 and were they long enough, and are they bent to go around the wheel well or are they like a diy thing??
|
11-13-2008, 07:33 PM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: G9 won't pull and cuts out sometimes
1 pair did it all. It's flexible rubber so you can bend it and screw it into place. For tight bends cut a triangle out of the inside flange using tin snips. If you want it to look right, you have to cut the wheel opening flange off of the body, front and rear.
If you get them keep us posted with pics! |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-14-2008, 06:38 AM | #10 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: G9 won't pull and cuts out sometimes
ok, but how far did it stick out compared to the stock body flares, when you replace them with theses other ones
|
|
|
Similar Threads | ||||
Thread | Forum | |||
91 Ez GO CUTS OUT AT 3/4 THROTTLE | Electric EZGO | |||
Charger cuts off after 5 mins? | Electric Club Car | |||
Help !!!!!!! 36v Ezgo Won't Pull | Electric EZGO | |||
what is the most i could pull | Gas EZGO |