pds motor , replace bearing how do i do it

alzgrdr1 · 03-09-2010, 04:53 PM

how do i get this thing apart to replace the bearing,, 2004 pds ez-go,, i have it pulled and apart exept the armature to the cast housing

alzgrdr1 · 03-09-2010, 08:47 PM

anyone know how to get to this bear

ing

FIXEROFCARTS · 03-10-2010, 09:13 AM

Pull the armature out, use a bearing puller and pull the bearing off and install new bearing. Its a simple operation

alzgrdr1 · 03-10-2010, 09:21 AM

the armature seems to be stuck in the cast housing , is there a hold down plate for the bearing behind the brush assembly or do i need to use a bigger hammer on the arm. shaft where the magnet for the speed scensor attachesand beat it out??

FIXEROFCARTS · 03-10-2010, 09:27 AM

what motor is it? The end cap should tap off once you removed the screws that hold the bearing plate to the motor

golfcarfixer · 03-10-2010, 09:29 AM

The bearing in a PDS motor has to be pressed out.you might want to take it to a machine shop and have it done unless you have a arbor press.

03-09-2010, 04:53 PM	#1
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28	how do i replace this bearing in my pds motor how do i get this thing apart to replace the bearing,, 2004 pds ez-go,, i have it pulled and apart exept the armature to the cast housing
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28

03-09-2010, 08:47 PM	#2
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28	Re: pds motor , replace bearing how do i do it anyone know how to get to this bearing
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28

03-10-2010, 09:13 AM	#3
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: pds motor , replace bearing how do i do it Pull the armature out, use a bearing puller and pull the bearing off and install new bearing. Its a simple operation

03-10-2010, 09:21 AM	#4
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28	Re: pds motor , replace bearing how do i do it the armature seems to be stuck in the cast housing , is there a hold down plate for the bearing behind the brush assembly or do i need to use a bigger hammer on the arm. shaft where the magnet for the speed scensor attachesand beat it out??
alzgrdr1 Not Yet Wild Join Date: Feb 2009 Posts: 28

03-10-2010, 09:27 AM	#5
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: pds motor , replace bearing how do i do it what motor is it? The end cap should tap off once you removed the screws that hold the bearing plate to the motor

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-10-2010, 09:29 AM	#6
golfcarfixer Gone Wild Join Date: Sep 2009 Location: Forest City N.C. Posts: 2,660	Re: pds motor , replace bearing how do i do it The bearing in a PDS motor has to be pressed out.you might want to take it to a machine shop and have it done unless you have a arbor press.

Similar Threads
Thread	Forum
Please educate me on motor centering bearing	Electric Club Car
Axle Bearing	Electric Club Car
Replace cables from batteries to motor?	Electric EZGO
Bearing Size	Gas Yamaha
busted bearing	Electric Club Car