lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Columbia ParCar


Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-21-2018, 10:25 AM   #21
swb713
Gone Wild
 
swb713's Avatar
Columbia
 
Join Date: Aug 2018
Location: Orange County, California
Posts: 279
Default Re: Replacing a Sevcon 6337T45303 Controller with an Altrax XCT Round 2

Quote:
Originally Posted by bluwtr49 View Post
I'm hoping that wiring diagram is some what useful but, if I were to do it over, I would simply remove the entire wiring harness and rewire the cart as a club car (IQ I believe). Part of the issue is that Columbia using several splices that are buried in the harness and some of those need to be accessed.

Before I started this project I studied all the wiring diagrams for various other carts which are available on the Alltrax website. When you look at them it becomes obvious that all the hardware is pretty much the same and there are only a couple of dozen wires in the whole cart so a complete rewire isn't a significant issue and probably easier than patching in the circuits necessary.

One of the biggest challenges was to replace the accelerator module with a 0 - 5K pot. The Colombia supplied device mounted up by the hydraulic brake master cylinder and he had to fab a new mount under the car. I'll try to get underneath and snap a couple of pics.

Best of luck and if you need any other info just let me know.

I'll keep you posted.

I might end up doing a complete rewire myself as well.
swb713 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-16-2024, 08:50 AM   #22
Vediz
Not Yet Wild
 
Join Date: Feb 2024
Posts: 16
Default Re: Replacing a Sevcon 6337T45303 Controller with an Altrax XCT Round 2

I know this is an old post but I would like more information on the conversion froms sevcon millipak 4x4 to the alltrax. Does the original wiring harness plug directly into the new controller? Are both front and back wires connected to the one controller? Last question, I am not real familiar with what the 400 amp contactor does? I see the solendoid and contactor?? I would appreciate any help with this.
Vediz is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Columbia ParCar


Thread Tools
Display Modes


Similar Threads
Thread Forum
Replacement Sevcon Controller Columbia ParCar
Replacing a Sevcon 6337T45303 Controller with an Altrax XCT Columbia ParCar
Altrax Controller Help Electric Club Car
Altrax XCT Controller Electric EZGO
Sevcon controller Columbia ParCar


All times are GMT -5. The time now is 03:45 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.