|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-27-2022, 11:04 AM | #1 |
Not Yet Wild
Join Date: Apr 2016
Posts: 14
|
AllTrax Controller and High torque motor - questions
2014 YDRE 48V cart 6inch lift and back seat
Replaced stock with an alltrax 500amp controller and high torque motor We use this cart for 3 things; Hunting, neighborhood roads and then campgrounds I was looking at a FN-Key setup for the cart, but not sure what I would change for settings. Basically Hunting would be a slower speed and more torque and street would be highest speed and less torque. campground would be somewhere in the middle Also, what is the advantage of either lowering or raising the REGEN settings? I am sure there are plenty of people on here that have done this. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-27-2022, 02:36 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,126
|
Re: AllTrax Controller and High torque motor - questions
With the same motor, what you are asking for is a compromise. You can play with field maps to get a bit more speed / less torque. You can ask Alltrax for a few field maps to try.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
WTB: Alltrax Controller & Torque Motor For CC DS (2008) | Golf Carts and Parts | |||
High torque motor/ controller recommendations | Electric Club Car | |||
ALLTRAX XCT500 and D&D 170-502-0001 High Torque Motor Upgrade | Electric EZGO | |||
High torque motor getting hot will bigger controller help? | Electric EZGO | |||
Alltrax DCX 500 Controller, D&D torque Motor | Golf Carts and Parts |