'89 club car moves when key off???

[shadowman]

for the price of the solenoid i would replace it, thats what i,m thinking the solenoid is stuck on.................................

[goodoleboy80]

Just ordered new solenoid off ebay. Hope this fixes it. When comes in and install I will report back. Thanks to all that posted to help.

[goodoleboy80]

Solenoid arrived today hopefully I'll have time tomorrow to install. Everyone just keep checking back for my results.

[goodoleboy80]

I installed the new solenoid today. Now the cart WON'T do anything????? I don't understand??? I wired it the same as the other one (like diagram found on here), but still nothing. Even tried a new key switch with no luck. PLEASE HELP!!!!!! THANKS

[shadowman]

have you checked the micro switch for the solenoid? also keep in mind its quite possible to get a bad solenoid right out of the box........at this point i would check the wiring to the micro switch the switch itself and if you can get a known good solenoid to just put in and see what happens.......also check the micro switch in the V-glide.................................

[goodoleboy80]

Shadowman thanks. But I have already checked the micro switch for the solenoid (bypassed it) and checked wiring to and from the micro switch. All seems to be fine. Haven't checked micro switch in v-glide yet. Crossed out new solenoid and it ran. So I figured it was just a bad solenoid out off the box.(Last time I buy electical componants off the net.) Anymore suggestions will be much appreciated. Need to get this thing going to blackpowder hunt off of. (Dec 13-21) Broke my leg and fractured my face in Aug. in 4-wheeler wreck, so am unable to walk to deerstand. THANKS TO ALL

[shadowman]

yes you could have got a bad solenoid right out of the box.........also just to make certain make sure your getting a golfcart solenoid......................

[goodoleboy80]

I said to he77 with it and took it to the dealer today. Got tired of f-in with the thang. Maybe they can fix it??? THANKS TO ALL THAT TRIED TO HELP!!!!!

[JRay]

Let us know what the final fix is.

[goodoleboy80]

I got my cart back day before yesterday. I knew it would be something simple and it was. It needed another new cable from batts to f/r switch. I hadn't replaced it when I replaced all other batt cables and batts in '04. It looked good on the outside but was corroded on the inside. Like I've read on here before, if you are going to replace one replace all. I know it won't be long before I have to replace batts again because they have sat for along time without being used. Thanks again to all that helped and hope this helps anyone else.