|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-31-2008, 09:16 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2008
Posts: 9
|
Split the case on a 244 Robin
Is there a gasket between the cases or should I silicone it? I can't seem to find a gasket online. 1986 Marathon
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-01-2008, 12:25 PM
|
#2 |
|
Not Yet Wild
Join Date: May 2008
Location: California
Posts: 20
|
Re: Split the case on a 244 Robin
I just split an 81' open and it looks like it's just metal to metal...
Click on the pics to my post about rebuilding an oldie..   |
|
|
|
|
06-20-2008, 12:15 AM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2008
Location: SoCal
Posts: 5
|
Re: Split the case on a 244 Robin
Your pics are making me feel better about tearing into mine! Was that crank salvageble
|
|
|
|
|
06-20-2008, 09:06 AM
|
#4 |
|
Not Yet Wild
Join Date: May 2008
Location: California
Posts: 20
|
Re: Split the case on a 244 Robin
I only just got it open all the way...
  |
|
|
|
|
06-20-2008, 01:32 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2008
Location: SoCal
Posts: 5
|
Re: Split the case on a 244 Robin
Perfect keep the pics comming, I will start on Monday sorting the parts out to figure what I need and try to figure how to put it back together.
|
|
|
|
|
06-20-2008, 09:38 PM
|
#6 |
|
WILD
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
|
Re: Split the case on a 244 Robin
I think if you split the case you need a seal inbetween them, or else you wont get a very good vaccum in the bottom end. Silicon should work, just make sure not to get it on any moving parts.
|
|
|
|
|
06-25-2008, 09:12 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2008
Posts: 28
|
Re: Split the case on a 244 Robin
You can use RTV, but when I rebuilt my Robin I used anaerobic gasket maker. It lookes alot like locktite, and its the stuff I use on any super tight joints between case components that could squish the rtv out. Like transfer cases.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 4 Stroke 295cc Robin | Gas EZGO | |||
| robin 295 engine removal 97 txt | Gas EZGO | |||
| NEED HELP! With 1998 ezgo with 295 robin | Gas EZGO | |||
| the basket case lives | Electric Yamaha | |||
Linear Mode
