|
Design Center Shop tools, fabrication and Paint and Body |
|
Thread Tools | Display Modes |
12-09-2022, 07:40 AM | #121 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 3D printer thread
You have 15 posts so you should be able to PM.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-09-2022, 08:40 AM | #122 | |
Not Yet Wild
Join Date: Nov 2022
Location: Michigan
Posts: 72
|
Re: 3D printer thread
Quote:
|
|
01-09-2024, 09:33 AM | #123 |
Gone Wild
Join Date: Jul 2019
Location: Katy TX
Posts: 162
|
Re: 3D printer thread
Great thread, lets keep it going.
I'm going to use Jkelre mirror brackets to put a 5p mirror on my new Onward. I got into 3d printing a year or so ago with a 3pro on sale for $100. Now i have 2 printers and a lot more money into it! Here are a few of my designs on Thingiverse https://www.thingiverse.com/jeffreymcguire/designs I've also designed multiple cup holders and rod holders for Onwards and Precedents. |
01-23-2024, 10:26 AM | #124 |
Gone Wild
Join Date: Jul 2019
Location: Katy TX
Posts: 162
|
Re: 3D printer thread
I tried Jkerle's mirror bracket but found that the mirror i bought was only a 4 panel and was 1" narrower than the roof brackets. That had the brackets he designed flexing quite a bit. I designed a new bracket just for my Onward that moves the mirror closer to the windshield and was wider to account for my mirror width. I have published it on my thingiverse if anyone is interested.
|
02-28-2024, 10:51 AM | #125 |
Not Yet Wild
Join Date: Feb 2024
Posts: 4
|
Re: 3D printer thread
|
03-14-2024, 06:43 AM | #126 |
Not Yet Wild
Join Date: Oct 2023
Posts: 1
|
Re: 3D printer thread
Hello All I could never find a good place to mount selenoid and tow/run Switch that was functional so I decided to design my own. I need to make a couple of Rev but it is functional.
|