|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-14-2009, 02:59 PM | #1 |
Getting Wild
Join Date: Jul 2009
Posts: 76
|
G16 Secondary clutch
Hello, Just wondering if any one could explain if i have to preload the stock spring on the secondary clutch, and if so how do i do this, I had to remove clutch to replace a bearing in rear end,
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-14-2009, 03:06 PM | #2 |
Gone Wild
Join Date: Feb 2009
Location: P-COLA
Posts: 1,176
|
Re: G16 Secondary clutch
Put the spring in B 4 and as you install it on the shaft, rotate the inner sheeve clock wise until the ramps are in line. Should only have ta rotate it about 1/8 - 1/4 turn.
|
07-14-2009, 06:54 PM | #3 |
Getting Wild
Join Date: Jul 2009
Posts: 76
|
Re: G16 Secondary clutch
Ok thanks very much.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
yamaha G9 secondary clutch nut removal | Gas Yamaha | |||
Secondary 28 degree clutch | Big Block Talk! | |||
91 g2 secondary clutch spring | Gas Yamaha | |||
Need a secondary clutch | Golf Carts and Parts | |||
what is the best secondary clutch | Gas Yamaha |