![]() |
|
Design Center Shop tools, fabrication and Paint and Body |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#121 |
Gone Wild
![]() ![]() Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
![]() You have 15 posts so you should be able to PM.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#122 | |
Not Yet Wild
![]() Join Date: Nov 2022
Location: Michigan
Posts: 72
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#123 |
Gone Wild
![]() Join Date: Jul 2019
Location: Katy TX
Posts: 162
|
![]() Great thread, lets keep it going.
I'm going to use Jkelre mirror brackets to put a 5p mirror on my new Onward. I got into 3d printing a year or so ago with a 3pro on sale for $100. Now i have 2 printers and a lot more money into it! Here are a few of my designs on Thingiverse https://www.thingiverse.com/jeffreymcguire/designs I've also designed multiple cup holders and rod holders for Onwards and Precedents. |
![]() |
![]() |
![]() |
#124 |
Gone Wild
![]() Join Date: Jul 2019
Location: Katy TX
Posts: 162
|
![]() I tried Jkerle's mirror bracket but found that the mirror i bought was only a 4 panel and was 1" narrower than the roof brackets. That had the brackets he designed flexing quite a bit. I designed a new bracket just for my Onward that moves the mirror closer to the windshield and was wider to account for my mirror width. I have published it on my thingiverse if anyone is interested.
|
![]() |
![]() |
![]() |
#125 |
Not Yet Wild
Join Date: Feb 2024
Posts: 4
|
![]() |
![]() |
![]() |
![]() |
#126 |
Not Yet Wild
Join Date: Oct 2023
Posts: 1
|
![]() Hello All I could never find a good place to mount selenoid and tow/run Switch that was functional so I decided to design my own. I need to make a couple of Rev but it is functional.
|
![]() |
![]() |