|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-08-2016, 09:57 PM
|
#1 |
|
Getting Wild
Join Date: Mar 2016
Location: Upstate SC
Posts: 111
|
Alltrax XCT 500 Amp install
I'll attach pics. Having trouble mounting. If I mount with B+, B- down then the harness won't plug in. Mounted this way (in pics) the whole assembly (whatever that plate is called) won't go back into place. Before I go cutting I thought I'd ask for suggestions. 2013 Precedent, Excel
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-08-2016, 10:15 PM
|
#2 |
|
Gone Wild
 Join Date: Jan 2014
Location: Okatie, SC
Posts: 308
|
Re: Alltrax XCT 500 Amp install
Look at some of the other install pics, some are mounted horizontally and did away with the OBC. Others who have done this install will chime in soon.
 |
|
|
|
|
04-09-2016, 07:53 AM
|
#3 | |
|
Getting Wild
Join Date: Mar 2016
Location: Upstate SC
Posts: 111
|
Re: Alltrax XCT 500 Amp install
Quote:
Thanks. Found this on here http://www.buggiesgonewild.com/elect...q-upgrade.html I'm going to try that this morning |
|
|
|
|
|
04-09-2016, 08:37 AM
|
#4 |
|
Gone Wild
Join Date: Feb 2016
Location: South GA
Posts: 227
|
Re: Alltrax XCT 500 Amp install
I had an entire post with pics up of mine and then realized yours in in back of tray and mine is in middle. Didn't see the 2013. Hope you get it figured out though
|
|
|
|
|
04-09-2016, 09:04 AM
|
#5 |
|
Gone Wild
Join Date: Jan 2014
Location: Okatie, SC
Posts: 308
|
Re: Alltrax XCT 500 Amp install
thompson521dc don't for get to include pics of your install. They are worth millions to others.
|
|
|
|
|
04-09-2016, 01:55 PM
|
#6 |
|
Getting Wild
Join Date: Mar 2016
Location: Upstate SC
Posts: 111
|
Re: Alltrax XCT 500 Amp install
Mounting problem solved (for now)
My new problem is the obc stud. The package I bought from parts unlimited has cables, controller, and obc stud. It seems like the protected part of the bolt is too wide. When it is tightened on one side I cannot tighten on the other. |
|
|
|
|
04-09-2016, 02:16 PM
|
#7 |
|
Gone Wild
Join Date: Jan 2014
Location: Okatie, SC
Posts: 308
|
Re: Alltrax XCT 500 Amp install
I may be wrong and hopefully someone will chime in here soon, but the part of the stud that goes thru the OBC does not need to be covered. Also the nut near the hole of the OBC only need to be finger tight. Cables need to be tightened between first and second nut. Four nuts total. BTW, what size motor are you running, stock or modified, tires?
 |
|
|
|
|
04-09-2016, 02:48 PM
|
#8 | |
|
Getting Wild
Join Date: Mar 2016
Location: Upstate SC
Posts: 111
|
Re: Alltrax XCT 500 Amp install
Quote:
|
|
|
|
|
|
04-09-2016, 02:49 PM
|
#9 |
|
Getting Wild
Join Date: Mar 2016
Location: Upstate SC
Posts: 111
|
Re: Alltrax XCT 500 Amp install
I understand the bolts against the obc shouldn't be really tight but should I have that much play?
|
|
|
|
|
04-09-2016, 04:59 PM
|
#10 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 3,211
|
Re: Alltrax XCT 500 Amp install
Play is ok as long as your cable connections to the stud are tight.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax xct install | Electric Club Car | |||
| Help with alltrax install | Electric EZGO | |||
| Alltrax install in G22? | Extreme DC! | |||
| help with alltrax DCX install | Electric Club Car | |||
| Alltrax DCX500 Install | Electric EZGO | |||
Linear Mode
