![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Getting Wild
![]() Join Date: Oct 2008
Location: Southeastern, VA
Posts: 79
|
![]() I was hoping someone out there could advise me on the proper way to make valve adjustment on a Yamaha G-8. I understand the setting is .004 and made when cold, but, I'm not sure if the adjustment is made at TDC or when the opposite valve is in compression or somewhere else.
Thanks, George |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
![]() Join Date: Aug 2008
Location: Brookings, SD
Posts: 30
|
![]() TDC with both valves closed
|
![]() |
![]() |
![]() |
#3 |
Getting Wild
![]() Join Date: Oct 2008
Location: Southeastern, VA
Posts: 79
|
![]() Thanks for the assist
George |
![]() |
![]() |
![]() |
#4 |
gone yamaha!
![]() ![]() Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
![]() is that the same for a g9? 0.04'' at tdc with them closed?
thanks for any help! |
![]() |
![]() |
![]() |
#5 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,962
|
![]() It is the same for any internal combustion engine
![]() |
![]() |
![]() |
![]() |
#6 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 18,135
|
![]() |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#7 |
gone yamaha!
![]() ![]() Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
![]() thanks guys
|
![]() |
![]() |
![]() |
#8 |
gone yamaha!
![]() ![]() Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
![]() hey guys were is that adjustment made, i opened up my g9's valve cover and can't figure out were to measure???
|
![]() |
![]() |
![]() |
#9 |
gone yamaha!
![]() ![]() Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
![]() were do you measure the 0.004'' @ tdc under the valve cover??
i've got my cover off but don't know were to measure. oops sorry double post! |
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() ![]() Join Date: Jul 2008
Location: Reddick IL
Posts: 11,249
|
![]() Saber cat put the tools down and think for two seconds. Do you have a feeler gauge or a micrometer.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Valve Adjustment procedure for '91 CC | Gas Club Car | |||
videos of my 2000 ez-go 4 cycle needing valve adjustment | Videos | |||
Valve Adjustment procedure for cp400 | Gas Club Car | |||
EZGO 295 - 350 engine Valve Adjustment | Ezgo Gas Tech | |||
help with valve adjustment | Gas Club Car |