11-26-2020, 11:57 AM | #11 |
Not Yet Wild
Join Date: Nov 2020
Posts: 1
|
Re: 91 Ezgo gxt-800 build
How did you do the lift kit on your cart?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2020, 12:25 AM | #12 |
Not Yet Wild
Join Date: Jan 2020
Location: Augusta ga
Posts: 41
|
Re: 91 Ezgo gxt-800 build
Sorry I just checked this. I welded up 4” blocks made from 2”x1” (x(2) to make them square) tubing I had laying around for the front. I flipped the tie rod connected to steering column to better suit the steering geometry. On the back it has the coil springs so I welded another 4” block and welded a piece of pipe to keep spring in place. Also, I extended all the shock mounts to match new ride height
|
12-02-2020, 12:29 AM | #13 |
Not Yet Wild
Join Date: Jan 2020
Location: Augusta ga
Posts: 41
|
Re: 91 Ezgo gxt-800 build
These are some pics already had on phone. I’ll try to take better tomorrow. Hope you can see kinda the route I went
|
12-02-2020, 09:21 PM | #14 |
Not Yet Wild
Join Date: Jan 2020
Location: Augusta ga
Posts: 41
|
Re: 91 Ezgo gxt-800 build
Sorry I’m just getting back to you. Here is a diagram. Hope this helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
VC EZGO Build ... | Clone Engine Swaps | |||
'07 EZGO Build...... | On Road Golf Carts! | |||
my ezgo txt build | Lifted Golf Carts | |||
96 Ezgo txt build. | Gas EZGO | |||
EZGO Build Block Build - CPP kit, Allsports LT | Big Block Talk! |