Robin EH29C

riperapart · 02-13-2020, 12:57 PM

First time here, so please bear with me....thanks.
I just purchased a EZGO lifted gas cart and It seems to start up real slow and take a few mins of laying on the gas pedal to finally kick in and move. Motor seems sluggish but when i get moving on flat ground it goes about 13mph. ANY type of incline (drive way) it struggles, BAD!. I also noticed a good amount of oil puddled up in the air filter box. The guy I purchased it from said the motor was re-built last year (Piston and rings). What can I do? Is this a quality motor? The speed sound ok? I would like to go approx 25. Thanks for your time!!

Sent from my SM-N950U using Tapatalk

gotti · 02-13-2020, 01:15 PM

Quote:

Originally Posted by riperapart

First time here, so please bear with me....thanks.
I just purchased a EZGO lifted gas cart and It seems to start up real slow and take a few mins of laying on the gas pedal to finally kick in and move. Motor seems sluggish but when i get moving on flat ground it goes about 13mph. ANY type of incline (drive way) it struggles, BAD!. I also noticed a good amount of oil puddled up in the air filter box. The guy I purchased it from said the motor was re-built last year (Piston and rings). What can I do? Is this a quality motor? The speed sound ok? I would like to go approx 25. Thanks for your time!!

Sent from my SM-N950U using Tapatalk

The oil puddled up in the air filter box usually isn't a good sign. I'd start by checking the oil to see if there are any metal flakes present. Does the oil looked burnt at all? Do the spark plugs look ok? Those are some pretty simple things to check. Next you can get into compression being correct. Just my two cents.

CP241 · 02-13-2020, 01:35 PM

First, you say the cart is lifted. Where does the oil come to on the dipstick? Depending on how big of a lift, it should be about 1/3 way up the hatch Mark's at full.

Second, how does the belt look? When the cart is stopped where does the belt sit on the rear clutch?

Remove the belt, it just rolls off the rear clutch. Now grab the clutch halves and twist them apart. It should be hard to twist. And if you let go, they should snap back pretty hard.

CP241 · 02-13-2020, 01:37 PM

And yes the robins 295 is a great engine. 25mph may be asking a bit much, depending on your tire size but low 20's certainly isnt out of the question.

riperapart · 02-13-2020, 02:35 PM

Thanks for the reply everyone. When I get home from work I will look into this. What is my compression supposed to be?

Sent from my SM-N950U using Tapatalk

CP241 · 02-13-2020, 02:47 PM

165ish is ideal. But let's rule out the easy basic stuff first. If its overfilled with oil it will fill the airbox. Fo the plugs, drop.power, etc. Bad clutch and or belt will cause horrendous power problems as well.

riperapart · 02-13-2020, 07:52 PM

I'm back. Ok, finally was able to ge belt off. It definitely is cracked between the cogs. It was kinda difficult to get it off. Oil was dead nuts on the full line. 2 spark plugs were black and seemed kind of wet too.

Sent from my SM-N950U using Tapatalk

riperapart · 02-13-2020, 07:53 PM

Also. Dont know the year. I looked everywhere, under seat, under frame around motor compartment......

Sent from my SM-N950U using Tapatalk

riperapart · 02-13-2020, 08:26 PM

Compression test....
(belt removed). It shows 80 psi on one and 180 on the other.

Sent from my SM-N950U using Tapatalk

deafmusicman · 02-13-2020, 08:47 PM

Adjust valves to .004 and check compression again.

02-13-2020, 12:57 PM	#1
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29	Robin EH29C First time here, so please bear with me....thanks. I just purchased a EZGO lifted gas cart and It seems to start up real slow and take a few mins of laying on the gas pedal to finally kick in and move. Motor seems sluggish but when i get moving on flat ground it goes about 13mph. ANY type of incline (drive way) it struggles, BAD!. I also noticed a good amount of oil puddled up in the air filter box. The guy I purchased it from said the motor was re-built last year (Piston and rings). What can I do? Is this a quality motor? The speed sound ok? I would like to go approx 25. Thanks for your time!! Sent from my SM-N950U using Tapatalk
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29

02-13-2020, 01:35 PM	#3
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,838	Re: Robin EH29C First, you say the cart is lifted. Where does the oil come to on the dipstick? Depending on how big of a lift, it should be about 1/3 way up the hatch Mark's at full. Second, how does the belt look? When the cart is stopped where does the belt sit on the rear clutch? Remove the belt, it just rolls off the rear clutch. Now grab the clutch halves and twist them apart. It should be hard to twist. And if you let go, they should snap back pretty hard.

02-13-2020, 01:37 PM	#4
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,838	Re: Robin EH29C And yes the robins 295 is a great engine. 25mph may be asking a bit much, depending on your tire size but low 20's certainly isnt out of the question.

02-13-2020, 02:35 PM	#5
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29	Re: Robin EH29C Thanks for the reply everyone. When I get home from work I will look into this. What is my compression supposed to be? Sent from my SM-N950U using Tapatalk
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29

02-13-2020, 02:47 PM	#6
CP241 Nincompoop village idiot Join Date: Apr 2018 Location: Michigan Posts: 9,838	Re: Robin EH29C 165ish is ideal. But let's rule out the easy basic stuff first. If its overfilled with oil it will fill the airbox. Fo the plugs, drop.power, etc. Bad clutch and or belt will cause horrendous power problems as well.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-13-2020, 07:52 PM	#7
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29	Re: Robin EH29C I'm back. Ok, finally was able to ge belt off. It definitely is cracked between the cogs. It was kinda difficult to get it off. Oil was dead nuts on the full line. 2 spark plugs were black and seemed kind of wet too. Sent from my SM-N950U using Tapatalk
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29

02-13-2020, 07:53 PM	#8
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29	Re: Robin EH29C Also. Dont know the year. I looked everywhere, under seat, under frame around motor compartment...... Sent from my SM-N950U using Tapatalk
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29

02-13-2020, 08:26 PM	#9
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29	Re: Robin EH29C Compression test.... (belt removed). It shows 80 psi on one and 180 on the other. Sent from my SM-N950U using Tapatalk
riperapart Not Yet Wild Join Date: Mar 2018 Posts: 29

02-13-2020, 08:47 PM	#10
deafmusicman Not Yet Wild Join Date: Feb 2019 Posts: 11	Re: Robin EH29C Adjust valves to .004 and check compression again.
deafmusicman Not Yet Wild Join Date: Feb 2019 Posts: 11

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Robin eh29c camshaft	Gas EZGO
Robin EH29C Parts	Golf Carts and Parts
Robin eh29c 295cc	Gas EZGO
Robin eh29c	Gas EZGO
Smoking EH29C Robin	Gas EZGO