|
07-29-2019, 11:32 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2019
Posts: 9
|
Robin eh29c camshaft
I have a 2000 ezgo txt with the robin eh29c motor. I snapped a piston connecting rod. Upon inspection i noticed the end of the camshaft has a groove in it and a very slight "play" on that end of the head
Is this groove something i should be concerned with? I thought about having the shaft milled and having a bushing put into the head to get a tighter fit. The slop is about 1mm. Any thoughts would be appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2019, 12:23 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2019
Posts: 9
|
Re: Robin eh29c camshaft
Here are photos if the shaft
|
|
|
|
|
07-31-2019, 03:28 PM
|
#3 |
|
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 429
|
Re: Robin eh29c camshaft
That’s pretty bad I’d check the head too and make sure it didn’t wipe that out too
|
|
|
|
|
07-31-2019, 05:04 PM
|
#4 |
|
Nincompoop village idiot
 Join Date: Apr 2018
Location: Michigan
Posts: 9,838
|
Re: Robin eh29c camshaft
I'd say it's a pretty safe bet the cam and head are both toast. Sorry.
Time to replace both if you plan to rebuild, oil pressure is going to be a problem if you dont. Either that or it's time for a vegas cart 460. With the damage I see there, and with the difficulty of finding parts for these motors anymore, youd be at about a wash price wise. |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Robin EH29C Parts | Golf Carts and Parts | |||
| Robin EH29C No fuel to cyl's | Gas EZGO | |||
| Robin eh29c 295cc | Gas EZGO | |||
| Robin eh29c | Gas EZGO | |||
| Smoking EH29C Robin | Gas EZGO | |||
Linear Mode
