|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-17-2009, 12:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2009
Posts: 4
|
85 EZGO robin engine valve adjustments
After fighting with this 2 cycle I am begining to wonder if the valves are out of adjustment if that is possible or not. I can run the cart and watch the butterfly on the carburetor and see that it is closing all the way when I let off the gas but the cart still backfires if you start to ease into the throttle again. Could this be a valve problem and if so how do I adjust the valves. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-17-2009, 01:34 PM
|
#2 | |
|
****tard supreme
 Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 85 EZGO robin engine valve adjustments
Quote:
|
|
|
|
|
|
03-17-2009, 01:36 PM
|
#3 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: 85 EZGO robin engine valve adjustments
if you do have a 2 cycle? more then likely the carb needs to be cleaned.
|
|
|
|
|
03-17-2009, 01:36 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2008
Location: S.W. Missouri
Posts: 31
|
Re: 85 EZGO robin engine valve adjustments
Well first off, 2 stokes don't have valves so you will have a hard time adjusting them. Have you checked your compression with a gauge? You might also check your micro switch on your accelerator pedal. I had an issue on mine, the engine wouldn't run correctly and it ended up being the micro switch killing the ignition.
|
|
|
|
|
03-17-2009, 05:37 PM
|
#5 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: 85 EZGO robin engine valve adjustments
Hello riverview and Welcome to the forum.
|
|
|
|
|
03-17-2009, 07:12 PM
|
#6 | |
|
Gone Wild
Join Date: Oct 2008
Location: Out past the Creek, Arizona
Posts: 856
|
Re: 85 EZGO robin engine valve adjustments
Quote:
 |
|
|
|
|
|
06-27-2010, 10:56 AM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2010
Posts: 1
|
Re: 85 EZGO robin engine valve adjustments
Is the butterfly going back by itself or is the cable pulling it back? To correct my backfire problem I turned the key off and pushed the gas peddle to the floor. With the peddle to the floor I slid the stop and the spring tight against the butterfly. This will force the butterfly closed and stop dumping fuel into the exhaust. It worked for me (good luck).
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need Help With 295 Robin Engine | Gas EZGO | |||
| robin 295 engine removal 97 txt | Gas EZGO | |||
| torque tolerances for Robin 290 engine | Gas EZGO | |||
| robin engine wont ilde | Gas EZGO | |||
| 2000 robin engine | Gas EZGO | |||
Linear Mode
