|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-02-2020, 12:51 AM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
EZgo limited slip differential 614756 install
Hello all!
I just wanted to post up a few pictures and some experiences for the benefit of the group. After a ton of searching I did find a definitive answer as to weather the factory limited slip 614756 Would work on my 1992 Marathon solid state. It does! And it’s pretty awesome! There are some good threads on axle removal etc so I just wanted to post some pics of my process and comparisons etc. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-02-2020, 12:54 AM
|
#2 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
Re: EZgo limited slip differential 614756 install
Look how much bigger the pin is. Obviously the whole *cage*/chunk is much bigger. Bigger gears etc.
|
|
|
|
|
08-02-2020, 01:10 AM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
Re: EZgo limited slip differential 614756 install
1st, please don’t judge my horrible rust/corrosion or my mess of wiring..... I’m planing on pulling all the batteries etc this winter and doing some proper treatment and preservation....
I’m also completely rewiring (properly) for an Alltrax SR upgrade. But! When I was first checking the fit of the new dif I was freaking out because it didn’t fit up in the axle!!! Then I realized the limited slip plates weren’t bolted tightly together. After doing that it slipped right in! I was scared to death the limited slip would pop apart with parts flying everywhere... Maybe that’s dumb, but I clamped the 2 halves together with some simple paper binders. After starting the proper bolts I pulled the binders out. Then I tightened everything down. Ultra-black RTV’d the pan back on... let it set, then tightened it down. Put the short side axle in. Put a whole quart of Valvoline Synthpower 75W-140 in the long axle. Valvoline SynPower SAE 75W-140 Full Synthetic Gear Oil 1 QT https://www.amazon.com/dp/B0049J5FJY..._PDLjFbSV1P9HQ (From searching I tend to agree that these slow speed axles are better off ‘overfilled’) |
|
|
|
|
08-02-2020, 01:21 AM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
Re: EZgo limited slip differential 614756 install
Thoughts:
This is awesome! 1st worry was tearing up the lawn etc. Tested out out by doing tight circles both directions in the lawn. No damage at all! Great! Went out to the gravel driveway.... if it’s going to drag/spin a wheel it would do it here..... NOTHING! Totally planted and no sign of disturbing the gravel... I then went to test the limited slip out! I have wooded property that i have cut cart trails on. I have a section that's off camber, a climb, and definitely spins the wheels every time. A little slippage and it grabbed! Then it sat there as my OEM Curtis didn’t have the guts to get it over the hump.... limited slip = awesome.... Now I’m installing the Altraxx SR-48400 I’m expecting that to get me over the grunt of the *excitement* trail!!!! |
|
|
|
|
08-02-2020, 01:22 AM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
Re: EZgo limited slip differential 614756 install
BTW: sorry the photos are posting upside down etc.... I’m using an iPhone and wish I knew how to prevent that...
Sorry! |
|
|
|
|
08-14-2020, 12:18 PM
|
#6 |
|
Not Yet Wild
Join Date: May 2019
Location: Hephzibah,GA
Posts: 4
|
Re: EZgo limited slip differential 614756 install
Do you think this would work on a 95 txt ?
|
|
|
|
|
08-14-2020, 02:06 PM
|
#7 |
|
Not Yet Wild
Join Date: Sep 2015
Location: Shippensburg PA
Posts: 50
|
Re: EZgo limited slip differential 614756 install
If its electric it should. They’re not advertised as compatible with early (94 or less?)Marathon Axles but ARE compatible. They’re advertised for later models. Pretty sure your later model electric axle would work fine
|
|
|
|
|
08-14-2020, 04:32 PM
|
#8 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: EZgo limited slip differential 614756 install
I've put them in many things, including yamaha gas carts. But not All yamaha cas carts can have it. 1996-2006, 2007 G22a & 2015-2016 can for sure.
|
|
|
|
|
08-15-2020, 10:02 PM
|
#9 |
|
Not Yet Wild
Join Date: May 2019
Location: Hephzibah,GA
Posts: 4
|
Re: EZgo limited slip differential 614756 install
Well I guess we’re going to find out,I will order tomorrow.
|
|
|
|
|
08-16-2020, 12:35 PM
|
#10 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: EZgo limited slip differential 614756 install
Just for the information I am pretty sure this is the same carrier used in the rxv so if you can find a used one the diff will swap.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2016 EZGO Express S4 and need a limited slip differential | Gas EZGO | |||
| Limited Slip Differential | Gas Club Car | |||
| Limited slip differential | Electric Club Car | |||
| Limited Slip Differential ? | Electric EZGO | |||
| Limited Slip Differential | Gas Club Car | |||
Linear Mode
