|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-27-2017, 10:27 PM | #1 |
Not Yet Wild
Join Date: Feb 2017
Location: Longview, TX
Posts: 13
|
Question about wiring voltage reducer and voltage meter to key switch
I'm in the process of installing a voltage reducer for my 2004 EZGO TXT Series cart. Also, I have a battery voltage meter to mount on the dash. The instructions and diagrams for both of these say to connect to the back of the key switch. The back of my key switch has 2 spade connections, one with a blue wire and one with a green. Which of these should the new components attach to? And also, how do I go about connecting multiple wires to one spade terminal? Any help would be greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-27-2017, 10:49 PM | #2 |
Guest
Posts: n/a
|
Re: Question about wiring voltage reducer and voltage meter to key switch
the green wire
most just cut the wire and crimp in the wires using a but connector connect as many wires as you need , with the right size but connector |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Question about relay switch for voltage reducer... | Electric Yamaha | |||
Wiring for Voltage Reducer/New Key Switch | Electric EZGO | |||
48v Voltage Reducer Switch Question | Electric Club Car | |||
Wiring Voltage Reducer to Key Switch | Electric EZGO | |||
Key Switch/Voltage Reducer question | Electric EZGO |