|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
02-23-2016, 10:24 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 32
|
Replaced 750 ohm resistor with a 680 and now cart won't budge
The closest I could find locally is a 680 to replace a 750. Now the cart won't move an inch. Any thoughts?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-23-2016, 11:02 PM
|
#2 |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
What is the year, voltage, and drive system of the cart?
|
|
|
|
|
02-23-2016, 11:15 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
Cart should run without the resistor on ? Try that. Does the solenoid click when you try to go?
|
|
|
|
|
02-23-2016, 11:34 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 32
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
1993 Club Car. 36v. Solenoid does click.
|
|
|
|
|
02-24-2016, 12:11 AM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
No way that cart uses a 600-700 ohm precharge resistor!?
250 ohms is all it would need. But again, it will run without the resistor on. The solenoid not clicking is an activation circuit problem. The solenoid should get 36v between the 2 small terminals when you try to go - this makes the solenoid click. So which are you missing on the 2 small posts? The + or the -? |
|
|
|
|
02-24-2016, 09:40 AM
|
#6 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 32
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
When I say I replaced a resistor, I'm talking about a resistor in the v-glide.
|
|
|
|
|
02-24-2016, 09:49 AM
|
#7 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,166
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
680 to 750 isn't going to make it not run.
|
|
|
|
02-24-2016, 10:22 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,402
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
Oh
 a resistor coil |
|
|
|
|
02-24-2016, 02:18 PM
|
#9 |
|
Gone Wild
Join Date: Apr 2014
Location: Oregon City, Or
Posts: 1,977
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
FYI---Guys, this is sort of a second (or follow up) tread of a multi-step resistor problem. Sergio has the ball on the first thread.
. |
|
|
|
|
02-24-2016, 04:47 PM
|
#10 |
|
Not Yet Wild
Join Date: Feb 2016
Posts: 32
|
Re: Replaced 750 ohm resistor with a 680 and now cart won't budge
Solenoid not clicking but cart will go if I jump the solenoid with a screwdriver.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replaced bad battery but cart wont last | Electric EZGO | |||
| 88 EZGO electric resistor cart resistor problem | Electric EZGO | |||
| EZGO '99 shudders, replaced batteries, solenoid and resistor | Electric EZGO | |||
| Replaced batteries and cart wont run | Electric EZGO | |||
| Replaced batteries, now cart is dead. | Electric EZGO | |||
Linear Mode
