Blowing 15 A fuse

Putterman83 · 10-31-2018, 06:13 PM

2014 IQ President with Curtis 5206 controller, 3 1/2" lift 12" tires. Was in the process of upgrading to. #2 cables and PQ Bandit motor. During the process I crossed the positive and negative frying the solenoid diode and controller. Dumb trick trying to finish before the rain. Bottom line is I did not have the new motor installed when I shorted it. The old core was still in. My problem is I replace the 15A fuse, turn on the tow switch, the backup buzzer sounds, I turn the key on and the fuse blows again. Any thoughts?

10-31-2018, 06:13 PM	#1
Putterman83 Not Yet Wild Join Date: Oct 2018 Posts: 10	Blowing 15 A fuse 2014 IQ President with Curtis 5206 controller, 3 1/2" lift 12" tires. Was in the process of upgrading to. #2 cables and PQ Bandit motor. During the process I crossed the positive and negative frying the solenoid diode and controller. Dumb trick trying to finish before the rain. Bottom line is I did not have the new motor installed when I shorted it. The old core was still in. My problem is I replace the 15A fuse, turn on the tow switch, the backup buzzer sounds, I turn the key on and the fuse blows again. Any thoughts?
Putterman83 Not Yet Wild Join Date: Oct 2018 Posts: 10

Similar Threads
Thread	Forum
Keep blowing 10 Amp Fuse	Gas Yamaha
Blowing fuse	Gas Club Car
G1 blowing fuse	Gas Yamaha
blowing fuse on a 04 iq	Electric Club Car
Old G1 blowing fuse...	Gas Yamaha