|
Golf Carts and Parts *No Commercial Ads |
|
Thread Tools | Display Modes |
01-29-2012, 10:46 PM | #1 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
WTB crankshaft & Ballance shaft spacers for 352 ezgo
I'm building a ezgo, robin 352 eng from two broken ones and have everything I need except the crankshaft and ballencer shaft spacers, the ones I have are too thick, and the book says you need to be within.003 to .015 to be right. The one I need for the crankshaft is between .006 to .018, and for the ballencer is between .003 to .015. Any help would be nice.
In metric that would be 0.2mm to 0.4mm for the crankshaft 0.1mm to 0.4mm for the ballancer shaft These are small and should be easy to mail Willing to pay fair price Thank You |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-03-2012, 06:54 PM | #2 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: WTB crankshaft & Ballance shaft spacers for 352 ezgo
Would it help if I say
"PRETTY PLEASE" Doesn’t anyone have an old broken eng, know of a source for this part or is eng builder that can HELP ME? I really want to get this engine back together and in my golf car and have some fun. |
02-03-2012, 06:58 PM | #3 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: WTB crankshaft & Ballance shaft spacers for 352 ezgo
EZGO ,Subaru, Robin,,, two cylinder, four stroke engines
EH29 or EH35 have these spacers |
03-01-2012, 08:47 PM | #4 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: WTB crankshaft & Ballance shaft spacers for 352 ezgo
I found some washers the right thickness,, used my lathe to cut the ID to the right size, got a reminder of why you should wear eye protection , just a two dollar pair of goggles saved my eyeball. So I now have the spacer for the ballancer shaft
But I still NEED a spacer for the crankshaft. PLEASE HELP ME. |
03-07-2012, 10:52 PM | #5 |
Gone Wild
Join Date: May 2011
Location: Oklahoma City
Posts: 204
|
Re: WTB crankshaft & Ballance shaft spacers for 352 ezgo
I gave up, spent over an hour and made a spacer, got the eng back together and back into car.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
I need crank and balancer shaft spacers | Gas EZGO | |||
Jakes 2" billet wheel spacers & stud spacers | Golf Carts and Parts | |||
Crankshaft bearings on 79 EZGO | Gas EZGO | |||
Crankshaft Seal 89 EZGO | Gas EZGO | |||
Really need a crankshaft for 2PG 1982 EZGO | Golf Carts and Parts |