|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-08-2015, 12:09 PM | #1 |
Not Yet Wild
Join Date: Aug 2011
Posts: 8
|
Reversing Contactor Installation Trouble Shooting
I installed my much anticipated reversing contactor yesterday and need some help. When I turn the key switch on, toggle to forward, then engage the pedal all I hear is the loud click of RC. Same happens if I switch to reverse.
Any thoughts? I've check all the connections and seem to have everything connected property. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-08-2015, 12:57 PM | #2 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,205
|
Re: Reversing Contactor Installation Trouble Shooting
Thoughts:
#1--It would seem to me that you have the toggle switch wired correctly. You should have the wires on the toggle switch (the switch itself) all wired on "one side". If you look at the switch, there are two "lines" where you could wire the switch. Keep all of the wires hooked up in a straight line on the switch...one side or the other. #2--Are you sure that you have wired up the High Current wires to the correct places on the reversing contactors? Double check your wiring to the directions that ScottyB sent you. Or take some pic's of your installation with good markings of where your High Current wires go to, and post 'em here for "analysis". |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Reversing contactor installation | Electric EZGO | |||
reversing contactor | Electric EZGO | |||
Reversing Contactor?? | Electric EZGO | |||
Reversing Contactor not working? EZGO TXT 48V w/SW202 Contactor. How to test it? | Electric EZGO | |||
reversing a series motor without a reversing contactor? | Electric EZGO |