lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > For Sale > Golf Carts and Parts
Golf Carts and Parts *No Commercial Ads



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-16-2009, 12:13 PM   #1
ShortBusDriver
Getting Wild
 
ShortBusDriver's Avatar
Mixed Breed
 
Join Date: Aug 2009
Location: Southern Arizona
Posts: 87
Default I Need A Part

I have to throw this out there because if I can't find one I'm going to have to fabricate something or find a radiator hose at a parts store that's close.
I need the clean air intake hose for a '90 EZ-GO Marathon. That's the one with the Robin 3PG in it.
The one I need is the flex hose after the air cleaner and before the carb. Part number 22335 - G1. The air filter end is 2.5" and the carb side is 2".
Here's a pic of the hose:


If anyone has anything close and that might work, I'd like to buy it off ya.
If anyone has suggestions to use something else, I'd like those too.
ShortBusDriver is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-16-2009, 06:20 PM   #2
sundownshifter
Gone Wild
 
sundownshifter's Avatar
Club Car
 
Join Date: Feb 2007
Location: INDIANA
Posts: 2,094
Default Re: I Need A Part

I used a 2" hose I got from either Lowe's or Rural King can't remember which. I think its a pool filter hose they sell by the foot. Its been about 5 years.
sundownshifter is offline   Reply With Quote
Old 08-16-2009, 06:38 PM   #3
ShortBusDriver
Getting Wild
 
ShortBusDriver's Avatar
Mixed Breed
 
Join Date: Aug 2009
Location: Southern Arizona
Posts: 87
Default Re: I Need A Part

Yeah I was there and was looking at that. I think it would be good on the 2" side but I'm going to have to get creative to couple the 2.5 side on the carb.

I was also looking at possibly finding the right radiator hose or maybe that collapsible (accordian like) hose that sell for the air cleaner on older cars.
Still, the coupling will still be a challenge. PVC step up maybe? I don't know. I'm still working through it.
ShortBusDriver is offline   Reply With Quote
Old 08-16-2009, 06:43 PM   #4
sundownshifter
Gone Wild
 
sundownshifter's Avatar
Club Car
 
Join Date: Feb 2007
Location: INDIANA
Posts: 2,094
Default Re: I Need A Part

it's plastic it can be heated and stretched on one end
sundownshifter is offline   Reply With Quote
Old 08-16-2009, 08:20 PM   #5
essness
Not your usual outlaw
 
essness's Avatar
Yamaha
 
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
Default Re: I Need A Part

Quote:
Originally Posted by sundownshifter View Post
it's plastic it can be heated and stretched on one end
essness is offline   Reply With Quote
Old 08-16-2009, 08:31 PM   #6
tonyton
Gone Wild
 
tonyton's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
Default Re: I Need A Part

The auto parts stores have steel 2"- 2-1/2" adapters for exhaust pipes. About 3" long.
If it doesn't need to bend for 3", it may work.
tonyton is offline   Reply With Quote
Old 08-21-2009, 03:53 PM   #7
scerra
Not Yet Wild
 
Join Date: Jun 2009
Posts: 12
Default Re: I Need A Part

I have an original air intake hose that has a couple of small cracks. It can be fixed with a soldering iron & some plactic from your old hose.
Attached Images
File Type: jpg IMG_2211.jpg (60.6 KB, 5 views)
File Type: jpg IMG_2210.jpg (47.4 KB, 6 views)
scerra is offline   Reply With Quote
Old 08-21-2009, 04:26 PM   #8
ShortBusDriver
Getting Wild
 
ShortBusDriver's Avatar
Mixed Breed
 
Join Date: Aug 2009
Location: Southern Arizona
Posts: 87
Default Re: I Need A Part

Thanks but those cracks mean more are coming.
It would be nice to have the real McCoy but I think I'm going to build something that'll last a while.

But thank you very much for responding..
ShortBusDriver is offline   Reply With Quote
Old 08-21-2009, 05:44 PM   #9
SP-Electronics
Gone Wild
 
Join Date: Aug 2008
Location: Tucson, AZ
Posts: 979
Default Re: I Need A Part

I would go find some of the silicone tubing like they use for aftermarket intake systems on cars, and build your own custom setup. I am planning on moving my air filter to a higher and more remote location on one of my carts, and that is what I plan to use. I'm thinking about building a sealed box near the top of the rear seat cowl, and plumb it to the intake, and then vent it to the outside through the side of the cowl, with a louver or "flap" of some kind, so it's sort of like a ram air or cold air intake system. It should put it up high enough to stay out of any semi deep water I might get into, and should keep the sludge from flying up underneath the cart and messing things up. Plus it should give it better airflow.
SP-Electronics is offline   Reply With Quote
Old 08-21-2009, 07:34 PM   #10
tonyton
Gone Wild
 
tonyton's Avatar
E-Z-GO
 
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
Default Re: I Need A Part

I think I found it, but it's in a kit and it doesn't show that p/n by itself. Part numbers do change, this catalog doesn't have that exact number....the kit is 120. plus!
Back to the radiator hose...Good Luck
Attached Images
File Type: jpg AAhoses.jpg (24.0 KB, 9 views)
File Type: jpg AAhoses 002.jpg (39.8 KB, 5 views)
File Type: jpg AAhoses 003.jpg (39.0 KB, 5 views)
tonyton is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > For Sale > Golf Carts and Parts


Thread Tools
Display Modes


Similar Threads
Thread Forum
part 2 Gas EZGO
help to ID this part Gas Club Car
Part Id Gas EZGO
Looking for part, need help! Electric EZGO
Looking for G1 part Golf Carts and Parts


All times are GMT -5. The time now is 07:27 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.