Rivet free dash. 101.

TheWiltz · 06-03-2012, 01:25 PM

Here is how I put my dash together rivet free. Why? When I rebuild a dinosaur carage ill use rivets untilled then ill step up to the 1800s and use those new fangled bolts and screws.

So here it goes. The ones near the ball holder you can reach with your fingers. No big deal. The ones on the outside you need to drill a few holes.

Next, make yourself a sticky finger, I said STICKY finger!! And use it to get the nuts in.

Finally install the bolts. I also replaced the charges port rivets for a cleaner look.

Wiltz

chloe · 06-03-2012, 05:16 PM

Looks fine to me. It may be an issue, with those heads sticking out, if you ever put a dash cover on it. But as is, it look s good.

yurtle · 06-04-2012, 05:28 AM

You "need" to turn them until the slots are all the same, 90° or 45°.

cableguy_hd · 10-05-2012, 04:10 PM

Quote:

Originally Posted by yurtle

You "need" to turn them until the slots are all the same, 90° or 45°.

what a ball buster

....dash looks nice

yurtle · 10-05-2012, 04:33 PM

Old post, but if you keep reading, you'll see I'm in good company.

cableguy_hd · 10-05-2012, 04:50 PM

I agree to on the having the heads line up. I think its hilarious that the detail that is pointed out when a pic is posted

yurtle · 06-04-2012, 05:29 AM

You "need" to turn them until the slots are all the same, 0° or 45°.

TerryH · 06-04-2012, 07:39 AM

Quote:

Originally Posted by yurtle

You "need" to turn them until the slots are all the same, 0° or 45°.

LostHusker · 06-04-2012, 07:54 AM

Quote:

Originally Posted by yurtle

You "need" to turn them until the slots are all the same, 0° or 45°.

Umm I thought I was the only picky one

Papajohn011964 · 06-04-2012, 02:43 PM

Quote:

Originally Posted by yurtle

You "need" to turn them until the slots are all the same, 0° or 45°.

Spoken like a true electrician!

Nice work!!!!!

06-03-2012, 01:25 PM	#1
TheWiltz Gone Wild Join Date: Apr 2012 Location: South Louisiana Posts: 488	Rivet free dash. 101. Here is how I put my dash together rivet free. Why? When I rebuild a dinosaur carage ill use rivets untilled then ill step up to the 1800s and use those new fangled bolts and screws. So here it goes. The ones near the ball holder you can reach with your fingers. No big deal. The ones on the outside you need to drill a few holes. Next, make yourself a sticky finger, I said STICKY finger!! And use it to get the nuts in. Finally install the bolts. I also replaced the charges port rivets for a cleaner look. Wiltz

06-03-2012, 05:16 PM	#2
chloe Gone Wild Join Date: Aug 2011 Location: Central Delaware Posts: 859	Re: Rivet free dash. 101. Looks fine to me. It may be an issue, with those heads sticking out, if you ever put a dash cover on it. But as is, it look s good.

06-04-2012, 05:28 AM	#3
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Rivet free dash. 101. You "need" to turn them until the slots are all the same, 90° or 45°.

10-05-2012, 04:33 PM	#5
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Rivet free dash. 101. Old post, but if you keep reading, you'll see I'm in good company.

10-05-2012, 04:50 PM	#6
cableguy_hd Gone Wild Join Date: Nov 2011 Location: Danville,Va. Posts: 654	Re: Rivet free dash. 101. I agree to on the having the heads line up. I think its hilarious that the detail that is pointed out when a pic is posted

06-04-2012, 05:29 AM	#7
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Rivet free dash. 101. You "need" to turn them until the slots are all the same, 0° or 45°.

Similar Threads
Thread	Forum
EZGO Rivet List	Electric EZGO
Body rivet - where does this go?	Electric EZGO
floor mat and rivet question	Gas EZGO
rivet kit for ezgo	On Road Golf Carts!
Pop Rivet	Golf Carts and Parts