12-26-2017, 11:22 PM | #71 |
Not Yet Wild
Join Date: Dec 2017
Posts: 7
|
Re: 600rr ez go build
yes i did , drove up north last weekend and picked it up as a basket case. Motor ,rear end and front end all apart on it with a stock front beam. Motor was stuck in 3rd gear. Now in the process of getting it all lined out of witch rout i'm going. Was going to leave stock hight with a front disc brake set up on it and a 6:1 rear gear with a limited slip and some fat slicks on it,,,,BUT .. Now i come across this post and see how it was built and how low motor actually hangs out of the bottom a ton so i guess im going to have to go back to the lifted rout , we will see
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2017, 07:18 AM | #72 | |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
Quote:
|
|
12-27-2017, 08:35 PM | #73 |
Not Yet Wild
Join Date: Dec 2017
Posts: 7
|
Re: 600rr ez go build
the limited slip on ebay $220
dennis kirk for gear 0872911 $30 what kind of cart ate you building? cart /engine ? |
12-28-2017, 07:01 AM | #74 |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
ez go with acarburated 600cc motor from a kantana. thanks for the info brother ok so my chain is 530 and i need to convert to 520?? and what size sproket do i need fo the front and rear
|
12-28-2017, 07:54 AM | #75 |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
is this for the rear or front
|
12-29-2017, 07:01 PM | #76 |
Not Yet Wild
Join Date: Dec 2017
Posts: 7
|
Re: 600rr ez go build
that is the rear gear , yes needs both to be 520 chain
and the largest 520 sprocket that fits the katana motor for front you want to go to the 6:1 gear in rear with limited slip |
12-29-2017, 07:52 PM | #77 |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
|
12-29-2017, 09:25 PM | #78 |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
does is this the right front sproket for the motor??? its says it the 520 17 tooth for a 2003 suzuki kantana
|
12-29-2017, 10:17 PM | #79 |
Not Yet Wild
Join Date: Dec 2017
Location: florida
Posts: 39
|
Re: 600rr ez go build
ok so i found the sprockets now where do i find or how do i fine the 6:1 gears for the diff and the seal for diff and where do i find the manual to take the diff apart n remove governor and install gears
|
10-11-2018, 03:46 PM | #80 |
Not Yet Wild
Join Date: Dec 2017
Posts: 7
|
Re: 600rr ez go build
how was the cable hooked to gas pedal
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G8 build...........Wilson | On Road Golf Carts! | |||
Another G21 build | Lifted Golf Carts | |||
New Build | Lifted Golf Carts | |||
new toy to build | Gas Club Car | |||
Fun Build | Lifted Golf Carts |