No power after replacing solenoid

jcow · 07-07-2010, 06:46 PM

I have a 96 DS club car, 36volt and for the 2nd time have replaced the solenoid but still have no power (batteries are fully charged). There is no click from the solenoid either.

Initially I wired the first one up incorrect so assumed I fried the solenoid and/or diod do this time I replace both and am certain it is wired correctly. When I jump the soleniod it moves but otherwise nothing.

When I wired the first one wrong could I have effected the ignition? The limit switch? Also, this cart has a "snubber" that connects onto the small posts of the solenoid. Could that be bad? New to cart ownership so just picking this up.

Any suggestions would be appreciated.

07-07-2010, 06:46 PM	#1
jcow Not Yet Wild Join Date: Jun 2010 Location: Union Hall, VA Posts: 43	No power after replacing solenoid I have a 96 DS club car, 36volt and for the 2nd time have replaced the solenoid but still have no power (batteries are fully charged). There is no click from the solenoid either. Initially I wired the first one up incorrect so assumed I fried the solenoid and/or diod do this time I replace both and am certain it is wired correctly. When I jump the soleniod it moves but otherwise nothing. When I wired the first one wrong could I have effected the ignition? The limit switch? Also, this cart has a "snubber" that connects onto the small posts of the solenoid. Could that be bad? New to cart ownership so just picking this up. Any suggestions would be appreciated.

Similar Threads
Thread	Forum
no power to controller side of solenoid	Electric EZGO
Solenoid does not clickand no power to controller	Electric EZGO
no power to controller side of solenoid	Electric Club Car
240-ohm resistor across main power solenoid?	Electric Club Car
G9? Replacing stock air box with K&N?	Gas Yamaha