|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-17-2015, 08:56 AM | #1 |
Not Yet Wild
Join Date: Oct 2009
Location: Yuma, AZ
Posts: 55
|
Torque and setting on clone 430cc
What is the recommended torque setting for the head bolts and what is the suggested valve lash clearance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2015, 10:57 AM | #2 |
Gone Wild
Join Date: Sep 2011
Location: ARIZONA
Posts: 476
|
Re: Torque and setting on clone 430cc
.006in on the intake side
.008in on the exhaust side 26 ft-lbs on the cylinder head bolts. Yes only 26. |
03-17-2015, 07:35 PM | #3 |
Not Yet Wild
Join Date: Oct 2009
Location: Yuma, AZ
Posts: 55
|
Re: Torque and setting on clone 430cc
Thanks for the info. Many said .003. That sounded to tight.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
RXV Torque Setting | Electric EZGO | |||
torque setting on carb bolts | Big Block Talk! | |||
Torque setting on GX670 exhaust | Big Block Talk! | |||
Piston rod bolt Torque setting? | Gas EZGO | |||
Valve setting on 16hp clone? | Big Block Talk! |