|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-07-2013, 06:27 PM | #1 |
Getting Wild
Join Date: Sep 2012
Location: INDY
Posts: 125
|
Impact primary clutch bolt out??
I had planned on using my impact on the primary clutch bolt but it looks like the frame is in the way, so how do you guys get to it? My puller is on the way from Plowmans, done got the secondary sheave kit from them, not installed yet and clutch is going to be sent to them to be redone as soon as I get it off. Pulled the carb to make sure jets were clean..the two inside were clean but there's one on the outside on top of the carb that appears to be clogged..can't see daylight thru it or able to get bread tie thru it either. I'm not sure what that jet is for, I've done plenty of carb work but never seen one on the outside like this. Does the hole go all the way thru? The way it's made looks like it should.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-07-2013, 06:45 PM | #2 |
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: Impact primary clutch bolt out??
On the clutch, I just take the bolts out of the top shock mounts & lower my buggy. If its stock it should come off without doing this.
|
04-07-2013, 07:50 PM | #3 |
Gone Loco
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
|
Re: Impact primary clutch bolt out??
Me too!
|
04-07-2013, 08:24 PM | #4 |
Getting Wild
Join Date: Sep 2012
Location: INDY
Posts: 125
|
Re: Impact primary clutch bolt out??
Ok thank you, never even thought about that! Don't know what I would do without these forums. lol
|
04-08-2013, 08:29 PM | #5 |
Getting Wild
Join Date: Sep 2012
Location: INDY
Posts: 125
|
Re: Impact primary clutch bolt out??
Does anyone know about the jet I'm talking about? It's the one on the outside of the carb, not sure if its plugged or if its made that away. I can't see them making a jet on the outside like that with a hole for gunk to get in.
|
04-08-2013, 10:47 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Impact primary clutch bolt out??
The one on the outside is an internal "air mixer", it's not supposed to pass air through to the outside of the carb. all that's important on that one is that air passes through the bottom hole out the 3 side holes. if it is clogged, hard starting and low/mid speed power will suck.
|
04-09-2013, 04:23 AM | #7 |
Getting Wild
Join Date: Sep 2012
Location: INDY
Posts: 125
|
Re: Impact primary clutch bolt out??
Thank you cgtech..that's a relief, I was trying to unclog the darn thing.
|
04-12-2013, 08:11 PM | #8 |
Getting Wild
Join Date: Sep 2012
Location: INDY
Posts: 125
|
Re: Impact primary clutch bolt out??
Thanks to you guys I got my clutch out with no problems. I did end up getting Plowmans power kit with the orange spring..Man was that a tuff spring to get back on. My brother and I with the 3' pry bar had a heck of a time! Tried ratcheting straps and all..in the end the pry bar was the tool to use, I could not keep the straps from sliding off when trying them. I was never so glad to see something finished, clutch redone and probably be here Mon or Tue, can't wait to get it together and hook my trailer up to clean the limbs out of yard.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
primary clutch bolt size | Gas Yamaha | |||
Primary clutch bolt torque | Gas Yamaha | |||
Getting primary clutch apart? | Gas Club Car | |||
What size thread for Primary Puller Bolt? | Gas Yamaha | |||
96 DS stock drive clutch bolt size (exterior bolt) | Gas Club Car |