11-15-2012, 09:12 PM | #1 |
Getting Wild
Join Date: Aug 2012
Location: lake villa, ILLinios
Posts: 98
|
97 txt body paint
Hi everyone
I am new to this hobby of golf carts and have a couple of questions. I have read the how to paint plastic bodies. I understand the scuffing I understand the adhesion promoter but..... after applying the promoter can I use this primer and paint with clear coat? http://www.duplicolor.com/products/psFinishSystem/ I have a air compressor with auto sprayer I painted a 92 ezgo marathon steel body using the tips from this site and it turned out really nice metallic black but I am a little concern with the plastic body! thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-16-2012, 09:04 AM | #2 |
Gone Wild
Join Date: May 2009
Location: Marysville Wa
Posts: 696
|
Re: 97 txt body paint
That primer should be just fine to use. Really the only difference between prepping and painting plastic compared to steel is the adhesion promoter step. Unless you have taken the metal all the way down to bare steel "which you would then have to spray an etch primer" the procedure is exactly the same. Happy painting
|
11-16-2012, 10:21 PM | #3 |
Getting Wild
Join Date: Aug 2012
Location: lake villa, ILLinios
Posts: 98
|
Re: 97 txt body paint
thanks for advise..I can relieve my stress!
|
11-17-2012, 08:42 AM | #4 |
Gone Wild
Join Date: Sep 2010
Location: Dorr, MI
Posts: 210
|
Re: 97 txt body paint
Is the adhesion promoter needed if the cart was painted already? Do you need the adhesion prmoter on top of paint or just raw plastic?
|
11-18-2012, 09:36 PM | #5 |
Getting Wild
Join Date: Aug 2012
Location: lake villa, ILLinios
Posts: 98
|
Re: 97 txt body paint
on the painting plastic body sticky it states to scuff the painted body with red/burgundy soft bright not to sand down to plastic then use adhesion promoter to its instructions for adhesion time to coat
|
11-19-2012, 06:54 AM | #6 |
Gone Wild
Join Date: Sep 2010
Location: Dorr, MI
Posts: 210
|
Re: 97 txt body paint
I thought adhesion promoter was to seal raw plastic. If the cart is already painted it should have adhesion promoter, primer, and paint. Wouldnt that be enough to seal the raw plastic? I ask because a shop I am considering to paint my cart is telling me that and it seems to make sense.
|
11-19-2012, 09:07 AM | #7 |
Gone Wild
Join Date: May 2009
Location: Marysville Wa
Posts: 696
|
Re: 97 txt body paint
You are correct in that if it has already been painted once there is no need for the adhesion promoter. The only thing the promoter does is soften the plastic so the paint adheres properly.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Paint and body | Body and Paint | |||
EZ-go shuttle paint and body? | Body and Paint | |||
Romoving Body to Paint | Body and Paint | |||
Paint vs OEM Body Panels | Design Center | |||
Looking to paint the body. | Electric Club Car |