|
10-28-2012, 03:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Indpls
Posts: 36
|
Main jets FE400
Anybody know where I can buy jets for stock Keith carburetor? I need several different sizes. My fe400 is running too lean.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-28-2012, 04:04 PM
|
#2 | |
|
Never really finished
Join Date: Jun 2010
Location: Georgia
Posts: 1,102
|
Re: Main jets FE400
Quote:
|
|
|
|
|
|
10-28-2012, 04:26 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Indpls
Posts: 36
|
Re: Main jets FE400
Ya I have bits to drill them out. Only problem was my stock jet is stuck in carb so I'm going to destroy it drilling it out. I couldn't believe it I've taken tons of them out. Brand new engine and carb and jet was stuck.
|
|
|
|
|
10-28-2012, 04:32 PM
|
#4 | |
|
Never really finished
Join Date: Jun 2010
Location: Georgia
Posts: 1,102
|
Re: Main jets FE400
Quote:
|
|
|
|
|
|
11-13-2012, 07:11 PM
|
#5 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Indpls
Posts: 36
|
Re: Main jets FE400
Well I found jets. If anyone else is looking you can purchase ones for clone motors. They are the same and you can drill to whatever size needed.
|
|
|
|
|
11-13-2012, 08:39 PM
|
#6 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Main jets FE400
So tell us... were you finally able to unscrew your original jet from your carb?
If not... what did you have to do?  |
|
|
|
|
11-15-2012, 06:53 PM
|
#7 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Indpls
Posts: 36
|
Re: Main jets FE400
I ended up grinding a flat blade screwdriver to fit perfectly and a few taps with a hammer and finally it came out. Completely ruined of course only because newer CC main jets are aluminum and way too soft. Rejeted to run without air box with a K&N filter don't seem to miss the choke. For some reason my 400 seems to start easier than the 350 I had and the DS's I had previously. Not sure if its a huge performance gain on a stock motor but it took .005 bigger jet.
|
|
|
|
|
11-16-2012, 08:10 AM
|
#8 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Main jets FE400
I'm glad you got it taken care of! and thanks for the follow up!
 |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Kawasaki fe400 07 Precedent. | Lifted Golf Carts | |||
| FE400 Max RPM | Gas Club Car | |||
| Carb main jets | Gas EZGO | |||
| fe400 wanted | Golf Carts and Parts | |||
| MAIN JETS | Gas Yamaha | |||
Linear Mode
