|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-25-2022, 03:38 PM
|
#11 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
Did the test with key off brake locked starting in n flip from n to r 5 times ending in n and it made zero noise of any kind.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-25-2022, 03:41 PM
|
#12 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
Ok well I just went to move it and now it’s beeping 3 times with a pause followed by 2 beeps.
|
|
|
|
|
06-25-2022, 05:06 PM
|
#13 |
|
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: ezgo 36v cart for dummies
Ezgo TXT fault code 3-2 / the solenoid is welded.
|
|
|
|
|
06-25-2022, 07:37 PM
|
#14 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
I’m not arguing with you at all I’m sure that is what the code is but how could that be? If it was welded it wouldn’t turn off correctly rite? And I don’t see how that would limit the travel speed to 5 mph?
|
|
|
|
|
06-25-2022, 07:38 PM
|
#15 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
Also do you happen to know how many amp solenoid I would need for that cart?
|
|
|
|
|
06-26-2022, 01:56 PM
|
#16 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,173
|
Re: ezgo 36v cart for dummies
Stock solenoid is a white rogers 70 amp 36 volt. If it senses the solenoid closed it will go into limp mode. Try taking a screw driver handle and wrapping the side of the solenoid to see if it releases. To validate it is bad put it in tow, disconnect the pack negative and positive, mark them first, disconnect one of the main wires on the solenoid and check for continuity across the 2 large posts. If there it’s bad. If it is bad replace it with something bigger if you ever plan on upgrades.
|
|
|
|
06-26-2022, 08:48 PM
|
#17 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
Ok that makes sense. Thanks for the info I will test it tomorrow morning to verify it is toast and will order a replacement. And I will report back.
|
|
|
|
|
06-27-2022, 10:03 AM
|
#18 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
Checked the solenoid today and it test out fine. No continuity through the load posts.
|
|
|
|
|
06-29-2022, 08:01 PM
|
#19 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
I’ve got a solenoid ordered so once that comes in I will put it on and report back.
|
|
|
|
|
06-30-2022, 09:33 AM
|
#20 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 54
|
Re: ezgo 36v cart for dummies
i replaced the solenoid this morning and it is still only goes 5 mph. still giving the same code. 3 beeps then 2 beeps. anyone have any ideas?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Club Car for Dummies? | Electric Club Car | |||
| Golfcarts for dummies like me... | Extreme DC! | |||
| Clutches for dummies..... | Gas EZGO | |||
| 1987 Electric EZGO wiring diagram for Dummies | Electric EZGO | |||
| carts for dummies | Electric EZGO | |||
Linear Mode
