First Cart Build 99 TXT DCS Limo Dukes Of Hazard style!

[Waldo9]

So for everyone that does not want to read all of this here are my questions.

1. Will my Alltrax 300amp controller handle 20X8.5 tires and will 20" tires fit without a lift? I Just want to fill in the wheel wells.
2. There is a ton of greasey oil on my rear axle near my motor should I be worried?
3. What would you guys Value this cart at with a new set of refurbised batteries in its current condition.
4. Can a DCS cart use a speed chip?

Now on the my introduction:

Hey guys I just got this cart in a trade. Its my first real Cart that I'm going to turn into a project. Plan is to get it running (The batteries are dead) then im going to do a frame off restoration. I plan on tearing it down painting the frame and the the body. I want to go with 20" street tires no lift stock wheels. Its just going to be a family cart that we can cruise the beach town with and also take to the flea markets and what not.

Here is the little information I have gathered from reading this site. The Cart is a 1999 TXT DCS cart with I believe its a ?Programmable? ALLTRAX DCX300R5 300 amp 24-72V Controller. I found some Refurbished batteries all 6 for $250 with a 6 month warranty that im going to go with, I figured I will start with refurbs then upgrade to all new batteries once I get finished with the build. The solenoid is a White Rodgers 70-120224-5 coil VDC Cont. I dont think this is anything special? I know the Alltrax is upgraded from the original controller I wish it was a 400amp rather than a 300. My first question is will this alltrax 300amp controller and solenoid handle this limo with larger 20" tires? I wont be hauling a ton of weight just me my wife and kids. I think the Speed Chip for $10 will get me the speeds I want 18-20mph? I'm going to swing by a welding shop and grab some 2 or 4g battery wires when I get my batteries back. I cant tell yet if the cart came as a limo or was modified. The frame has some minor surface rust that I am going to use a wire wheel on then paint gloss black.










My Alltrax Controller