Starting at step 1

big nd fan · 07-21-2021, 08:36 PM

I have a TXTE with a date code of K0903 which I think it is a 2003 which I started to work on today for a friend. He put on a new controller, switch and solenoid.

I have read the stickies and looked at the troubleshooting chart. Not knowing what controller I have has hampered me from selecting the right one. I am pretty sure I have series but unsure about the controller. Not sure if I have a PDS or DCS, if those are the types.

If I can figure what I have I can make progress. The cart is dead and the solenoid does not click when the pedal is pressed. I have read about a tow switch which would explain the problem but I do not see one.

Thanks
Big ND Fan

big nd fan · 07-21-2021, 10:11 PM

I jumped the solenoid and I have forward and reverse. I checked continuity of the 4 wires going to the switch and other thing on the floor under the cover, all good.

Big ND Fan

Sir Nuke · 07-22-2021, 05:56 AM

big nd fan.....seeing as how you mentioned "the switch", can we assume you are talking the F&R switch? if so....you have a SERIES drive system cart, NOT a PDS or DCS....its SERIES. IF SO....you will have an F&R switch like this in front of the controller.....TRUE??

07-21-2021, 08:36 PM	#1
big nd fan Not Yet Wild Join Date: Dec 2012 Posts: 25	Starting at step 1 I have a TXTE with a date code of K0903 which I think it is a 2003 which I started to work on today for a friend. He put on a new controller, switch and solenoid. I have read the stickies and looked at the troubleshooting chart. Not knowing what controller I have has hampered me from selecting the right one. I am pretty sure I have series but unsure about the controller. Not sure if I have a PDS or DCS, if those are the types. If I can figure what I have I can make progress. The cart is dead and the solenoid does not click when the pedal is pressed. I have read about a tow switch which would explain the problem but I do not see one. Thanks Big ND Fan
big nd fan Not Yet Wild Join Date: Dec 2012 Posts: 25

07-21-2021, 10:11 PM	#2
big nd fan Not Yet Wild Join Date: Dec 2012 Posts: 25	Re: Starting at step 1 I jumped the solenoid and I have forward and reverse. I checked continuity of the 4 wires going to the switch and other thing on the floor under the cover, all good. Big ND Fan
big nd fan Not Yet Wild Join Date: Dec 2012 Posts: 25

07-22-2021, 05:56 AM	#3
Sir Nuke Master of All Things Join Date: May 2013 Location: West Columbia, Texas Posts: 17,998	Re: Starting at step 1 big nd fan.....seeing as how you mentioned "the switch", can we assume you are talking the F&R switch? if so....you have a SERIES drive system cart, NOT a PDS or DCS....its SERIES. IF SO....you will have an F&R switch like this in front of the controller.....TRUE??

Similar Threads
Thread	Forum
Installing a 48>12v reducer and fuse block on a DS for and by a Dummy - Step by Step	Electric Club Car
Yamaha G1 <>Step by step instructions to change crankshaft seals<>	Gas Yamaha
Step by step test procedure for cc?	Electric Club Car
Brake Light Install - my step by step.	Electric EZGO
Is there a website or link or step by step pictures for the HEI conversion	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum