|
07-07-2020, 04:08 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2020
Location: Oklahoma
Posts: 23
|
2 in 1 "toy"
So this is the current project. I think it may be an 875 series. It's Ezgo with what seems to be a Yamaha G2 series motor. Unfortunately the ID plate has been painted over but the previous owner believes it is a 1990 model. The motor fortunately still had readable numbers J38 027593. Wiring needs TLC and I think the ignitor is bad at this point. But, I have a fully functioning 4 foot by 9 foot aluminum rollback wrecker bed and fabricating a skid type box to put on and off that will make it a fire engine, complete with a rooftop water cannon. I'm wanting to do the hei conversion to simplify things. I'll also be installing a fuse block as it seems there isn't one fed by an 8 gauge wire straight from the battery. Then all the led lights, winch siren and other accessories will be fed straight from that. Also in search of a proper key switch as the current one is mangled and uses a screw driver for a key lol and may or may not be working right. Needless to say, my crazy @$$ stepped into a different world with this one 😂 Any info or tricks are greatly appreciated. I'll be using the wrecker version for all sorts of work and fun and the fire truck version for fun and shenanigans. Ah the projects we get into from insanity and creativity...
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2020, 07:34 AM
|
#2 |
|
Cave Dweller
 Join Date: Apr 2013
Location: Always On The Move
Posts: 22,238
|
Re: 2 in 1 "toy"
Nice , should be a fun build . Have no fear with baby yoda to help you
|
|
|
|
|
07-09-2020, 11:09 PM
|
#3 | |
|
Not Yet Wild
Join Date: Jul 2020
Location: Oklahoma
Posts: 23
|
Re: 2 in 1 "toy"
Quote:
 my niece loves him. Stage one is done and went riding around today. Waiting on air filter so it will run completely right. |
|
|
|
|
|
07-10-2020, 07:10 PM
|
#4 |
|
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: 2 in 1 "toy"
Great find, those work carts are really cool to do stuff with.
|
|
|
|
|
07-11-2020, 01:41 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 2 in 1 "toy"
Sweet, have fun!
 |
|
|
|
|
07-11-2020, 10:07 PM
|
#6 |
|
Getting Wild
Join Date: Jul 2011
Location: Altoona, IA
Posts: 91
|
Re: 2 in 1 "toy"
My Taylor-Dunn/Ezgo fire truck.....started out as a 36 volt warehouse truck.....has Ezgo rear subframe grafted onto TD chassis......Predator 22 hp V-Twin using Vegas Carts mount and clutch......removed front cantilever springs and installed 500# trailer springs and mounts for a much smoother ride...
Have fun on your build....I did..... |
|
|
|
|
07-13-2020, 02:17 AM
|
#7 | |
|
Not Yet Wild
Join Date: Jul 2020
Location: Oklahoma
Posts: 23
|
Re: 2 in 1 "toy"
Quote:
|
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Series motor - "S" and "A" post wiring | Electric EZGO | |||
| Big "thank you!" to JohnnieB and Yurtle, was "EZGO TXT Non-PDS Help/Questions" | Electric EZGO | |||
| will 2011 "PH" controller work on 2007 "PQ"? | Electric Club Car | |||
| Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
| Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
Linear Mode
