|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-20-2021, 02:19 PM | #1 |
Not Yet Wild
Join Date: Oct 2021
Location: Central California
Posts: 8
|
Ezgo 3Pg motor rebuild
I’m rebuilding my wife’s 1990 Ezgo. I’m wondering what you put between the lower cases. I installed crank, bearings & seals. Ready to mate the case, there was no gasket when I split & no gasket in my rebuild kit. What would y’all suggest? I’m thinking #2permatex. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-20-2021, 02:51 PM | #2 |
Nincompoop Club Member
Join Date: Jun 2016
Location: Idaho
Posts: 1,177
|
Re: Ezgo 3Pg motor rebuild
I've heard others use the brand Yamabond, it's a case sealer that I don't know much about. Mainly, make sure it's an 'anaerobic' sealer. The brand I use is by Permatex, but NOT #2. It comes with a spray-on prep then apply a small bead of the sealer just on one side.
|
11-21-2021, 08:40 AM | #3 |
Not Yet Wild
Join Date: Oct 2021
Location: Central California
Posts: 8
|
Re: Ezgo 3Pg motor rebuild
Thanks for the advice! Anaerobic sealant it is
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
ezgo motor whining - rebuild? | Electric EZGO | |||
83 ezgo motor rebuild problems | Gas EZGO | |||
36v ezgo motor rebuild | Electric EZGO | |||
EZGO RXV Motor Rebuild | Electric EZGO | |||
motor rebuild | Gas Club Car |