08-30-2021, 11:50 AM | #1 |
Not Yet Wild
Join Date: Jan 2017
Posts: 4
|
2010 tomberlin wiring help
I just got a 2010 tomberlin, wires are pulled out of box with hall effect sensor.
I purchased the new sensor without circuit board but need help with 4 wire positions. wires are pulled out of connectors and cant match color code |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2021, 07:17 PM | #2 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,966
|
Re: 2010 tomberlin wiring help
Hoping this will help you out
|
08-31-2021, 10:15 PM | #3 |
Not Yet Wild
Join Date: Aug 2021
Posts: 6
|
Re: 2010 tomberlin wiring help
Attached are two schematics. The website limits the file size so hopefully it shows up correctly.
|
09-01-2021, 08:26 AM | #4 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,966
|
Re: 2010 tomberlin wiring help
Can't read everything but as you can see on my uploaded picture ( taken from a '08 model ) there are 4 wires coming from the harness, one is going to the switch and the other 3 to the sensor. Colours are maybe different, so you'll have to identify each wire with a DVM. The black center wire on the sensor is definetely negative. Check with the Tomberlin service manual for individual voltage reading.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2010 Tomberlin emerge exelerator wiring help | Tomberlin | |||
2010 Tomberlin Emerge LSV Wiring Diagram | Tomberlin | |||
2010 Tomberlin Anvil | Tomberlin | |||
tomberlin 2010 | Tomberlin | |||
2010 Tomberlin | Tomberlin |