Outer Sheve Will Not Budge

[IndianAcres]

Spend 5 hours on it, can't get outer sheve off, heated up, soacked it, put 2X4 in-between, smacked the u know what out of it - even broke a 1X3 trying to pry it with almost bending the 2x4 all this while havn puller on -

What do I do short of taking apart is there Anything ???

I have now worked this for 5 days plus

[breugel]

I used this from CPP and it came right off. When I got it tight I just did a 1/4 turn on each bolt till it broke loose.

http://www.cartpartsplus.com/yamaha-...ch-puller.html

BTW Do not take the nut all the way off as it is under spring pressure. I backed it off to the end of the shaft.

[IndianAcres]

I just ordered it, even though i was using commerical puller
ill try anything, even though i have my doubts

Anybody in same boat me?

[Flintrock]

Just to double check, you are talking the about the driven clutch in the back, not teh primary sheave on the motor, right?
If the driven clutch, then the tool will work, I just made one but very similar. You NEED a different tool for the primary sheave......