09-14-2009, 06:28 PM | #1 |
Not Yet Wild
Join Date: Nov 2007
Posts: 30
|
Gear noise
Hi,
I just installed a 1994 rear end and a D&D 6:1 motor in my 1986 marathon. motor runs great, but the gears in the rear end are really loud. I got the rear end off ebay and it had no oil in it when I got it. It turns smooth and the gears look good. I used 30 wt oil. Is there anything else I should do to quiet it down? I really don't want to run it too long and screw up the gears. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-14-2009, 07:06 PM | #2 |
Gone Wild
Join Date: Dec 2008
Location: Liberty Lake, WA
Posts: 479
|
Re: Gear noise
You might try 90wt. gear oil. I have toned down older carts that way. You may want to check to see if it may be bearing noise also.
|
09-15-2009, 03:29 PM | #3 |
Gone Wild
Join Date: Aug 2008
Location: Cumming, GA
Posts: 313
|
Re: Gear noise
THe input shaft bearing is probably dry. These bearings are easily replaced. Remove motor and then the retaining ring. Shaft and bearing will slide out. The upgraded bearings will be sealed and therefore not subject to running out of oil that has to be slung up to the input shaft by main gear.
|
09-15-2009, 03:52 PM | #4 |
Not Yet Wild
Join Date: Nov 2007
Posts: 30
|
Re: Gear noise
Thanks very much for the replies.
|
09-15-2009, 05:21 PM | #5 |
Gone Wild
Join Date: Dec 2008
Location: Liberty Lake, WA
Posts: 479
|
Re: Gear noise
Glad to help out. Hope things work for you because thats why we get paid the big$$$.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2A knocking noise | Gas Yamaha | |||
G1 Noise ?? | Gas Yamaha | |||
'04 noise??? | Gas EZGO | |||
Rattling noise | Gas EZGO | |||
big sqreech noise | Gas EZGO |