|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-05-2012, 10:40 AM | #11 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: selenoid clicks, no movement
lol glad to hear you took precautions...curious of the outcome...let us know ;)
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-06-2012, 08:01 PM | #12 |
Not Yet Wild
Join Date: Jan 2012
Posts: 14
|
Re: selenoid clicks, no movement
Scotty, I think my cart is a dcs and the wiring diagram you sent appears to be a pds. Would you be kind enough to post the one for a dcs? Thanks
|
07-06-2012, 08:40 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: selenoid clicks, no movement
Here is one... it may need more work as to what is actually necessary, It is a bit of a mess, looks like some redundant paths... but it should get you going in the right direction
|
07-06-2012, 08:44 PM | #14 |
Not Yet Wild
Join Date: Jun 2012
Posts: 35
|
Re: selenoid clicks, no movement
Not sure if this helps, but mine did the same thing... so I replaced the solenoid ($25) and it fixed the problem!
Goodluck |
08-03-2012, 08:28 AM | #15 |
Not Yet Wild
Join Date: Jan 2012
Posts: 14
|
Re: selenoid clicks, no movement
i finally got around to replacing my solenoid last night and upon pressing the accelerator the solenoid isn't clicking, so presumably the solenoid wasn't the problem. with the key in the on position and in forward both sides of the solenoid read 38 volts, if i cut the key off the side of the solenoid labeled "bat" slowly goes to 0 volts while the opposite side stays at 38 volts.
i guess my step is to look into the solenoid activation circuit that scotty mentioned earlier but i'm confused about both sides of the solenoid being energized when the petal was not being pressed, is that how it's supposed to be? |
08-03-2012, 08:45 AM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: selenoid clicks, no movement
There is a precharge resistor across the large posts, that's why you read voltage at both posts when the Sol. is not closed.
First thing to do is to determine which half of the solenoid activation circuit is missing + or - |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
keeps burning up first selenoid | Electric Club Car | |||
Replace starter selenoid - generic ok? | Gas EZGO | |||
selenoid troble | Electric Club Car | |||
Pedal clicks but no movement | Electric EZGO | |||
96 CC 48V Solenoid clicks no movement - Newbie | Electric Club Car |