12-08-2019, 11:18 AM | #31 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
|
Re: 2000 Workhorse st350
Weak spark is 99% of the time a bad coil but could indicate bad engine ground as well
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-08-2019, 12:35 PM | #32 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,210
|
Re: 2000 Workhorse st350
Can you get it running to check you starter/generator output ? Should be 14.5 volts
I just have a hard time believing two coils are doing the same exact thing but like I said earlier it could be. Let us know about the S/G output ? I will give you a tip on where to find a coil that will work that is not an EZGO. I have one installed on my wife workhorse with the pre-mci engine and it works perfect. Much cheaper than the OEM that you can't find. It came off a Sea-Doo SKI DOO ZX CHASSIS 1999-02 500/600/700/800 IGNITION COIL #129700-4380 is the one I used last year. Try ebay and you will see they are out there. Made by Denso which is a top of the line company Here is the one I installed on my workhorse last year Last edited by trig123; 12-08-2019 at 12:50 PM.. Reason: Wrong picture |
12-08-2019, 02:27 PM | #33 |
Not Yet Wild
Join Date: Oct 2019
Posts: 21
|
Re: 2000 Workhorse st350
Yes, I did check starter/generator output @ 14.5 volts. I will be looking into one of the Ski-doo coils. Thanks Guys
|
12-08-2019, 03:49 PM | #34 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,210
|
Re: 2000 Workhorse st350
Please post back what you find out as it would help others with this issue.
|
12-10-2019, 10:58 PM | #35 |
Not Yet Wild
Join Date: Oct 2019
Posts: 21
|
Re: 2000 Workhorse st350
I will keep you guys posted. I did find a used hopefully good OEM coil. I will ohm both coils out after removing the existing coil and before I install the one I ordered.
|
12-16-2019, 09:44 PM | #36 |
Not Yet Wild
Join Date: Oct 2019
Posts: 21
|
Re: 2000 Workhorse st350
GOOD NEWS!! After jacking around for six + weeks. It was $130 new aftermarket coil bought from the dealer that was no good. I bought a used OEM for $45 and Bingo! In the process I also bought a aftermarket igniter box that proved to be junk also.
One thing forsure it was a good learning experience. Thanks Everyone for your imput!! |
12-19-2019, 08:39 PM | #37 |
Not Yet Wild
Join Date: Oct 2017
Posts: 26
|
Re: 2000 Workhorse st350
Good news! Thanks for reporting back.
|
12-20-2019, 09:23 AM | #38 |
Gone Wild
Join Date: Feb 2010
Location: Homosassa, FL
Posts: 415
|
Re: 2000 Workhorse st350
hate it that all these non oem parts are junk
I finally broke down and bought a oem carb for my txt and its never ran so good |
Tags |
1 0f 2 coil firing |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2000 Workhorse ST350- blown engine replacement | Gas EZGO | |||
2000 workhorse st350 shocks | Gas EZGO | |||
2000 EZ GO workhorse st350 | Lifted Golf Carts | |||
2000 st350 workhorse | Gas EZGO | |||
2000 ST350 workhorse wiring diagram | Gas EZGO |