|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-19-2012, 09:39 AM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 3
|
92 36v cc v glide takes off w/out engaging accelerator
My 92 v glide takes off as soon as I put it in forward (1st speed) without even touching the accelerator pedal. I would like to know some things I should check that may be causing this.
What I have done: I made sure the the wiper arm is all the way down on the first copper contact. That is all I have done. There are several other problems with the cart as well not sure if they are linked to this issue or not. First, the key switch is inop. I have checked an there is not power to either side of the switch. The switch opens and closes like it should. Second, I have power running through the frame (26v) I discovered this when I laid the key switch down and it arced on the metal going across the dash. Third, the cart does not go in reverse. The limit switch on top of the fwd/rev unit is stuck closed so power is constantly going through it. Fourth, I replaced the solenoid with a new one,( just shooting from the hip) the new solenoid did nothing. I did not check power going to it because really am not sure how it gets its power. I put the old one back on it and it is at least going in fwd again. I did notice that the old solenoid housing is cracked, may be a cause of volage getting to the frame??? Lastly, the guy I bought this cart from put 3 12v batteries in this thing, it apperas to be wire correctly in series but that is just me guessing. Any help/suggestions would be greatly appreciated. |
|
|
Similar Threads | ||||
Thread | Forum | |||
belt not engaging or poorly at best | Gas EZGO | |||
Trouble engaging engine | Gas EZGO | |||
Solenoid not engaging; Potentiometer? | Electric Club Car | |||
reverse not engaging while running | Big Block Talk! | |||
Engaging EZ-Go Hill brake | Electric EZGO |