09-01-2019, 08:28 AM | #1 |
Not Yet Wild
Join Date: Jul 2019
Location: Decatur, TX
Posts: 48
|
My Dog is Very Sad - Please comment on this post!!!
Hey y'all looking for a little advice regarding motor mounts.
As you can see my dog is very sad, because he's tired of me swearing at inanimate objects. IMG-0662.jpg I have the engine in, height and width mocked up and inline with the driver/driven clutch. Any suggestions on motor mounts? The space is very tight (oil pan is actually touching the frame), and I still have to squeeze the radiator in there somewhere. IMG-0752.jpg How to mount to the frame? Any dos/don'ts? Any wisdom you can impart? I'm using some scrap steel right now as you can see in the picture circled in red. I would prefer to have something a little more classy looking, stock looking. I am not a fabricator, please all remember this. IMG-0754.jpg Remember this engine came out of a lawn tractor, so it's mounts are a little wonky. The rear mounts on the engine, I can remove if need be and fab new ones. Picture below is the motor mounts on the engine (circled in red). IMG-0650.jpg The picture below is the original mounts from the lawn tractor frame (circled in red) and radiator mounts (circled in green). IMG-0648.jpg Please don't tell me to search the other threads, I don't need that drama in my life. If you have done a diesel swap and have some pictures of the motor mounts you fab'd up, please share. I'm about to lose my s##t on this thing and I've barely started. Thank you!!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2019, 07:50 AM | #2 |
Not Yet Wild
Join Date: Jul 2019
Location: Decatur, TX
Posts: 48
|
Re: My Dog is Very Sad - Please comment on this post!!!
Thank you for the overwhelming response to this post.
I got the motor mounts figured out and info is in my base thread. |
09-03-2019, 08:02 AM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,045
|
Re: My Dog is Very Sad - Please comment on this post!!!
Hope your dog is feeling better!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
09-04-2019, 07:10 AM | #4 |
Not Yet Wild
Join Date: Jul 2019
Location: Decatur, TX
Posts: 48
|
Re: My Dog is Very Sad - Please comment on this post!!!
|
Tags |
diesel, motor mount, motor mounts |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Not another question just a comment | Electric EZGO | |||
Does this sound right?? Charger comment | Electric Club Car | |||
electical,comment please | Electric EZGO |