lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-04-2009, 08:21 PM   #1
Tazman00
Gone Wild
 
Tazman00's Avatar
E-Z-GO
 
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
Default Alltrax 4844AXE install

I have a 94.5 Medalist stock 36V kart. I want to install an Alltrax 4844AXE 400amp controller. looking over the wiring diagram and looking at my stock controller, everything matches up except for the A2 pin.

On the diagram it shows to bolt two wires together and tape them up when installing the Alltrax, because there is no A2 pin. my stock controller on the A2 pin only has one wire. do I run the bolt thru the one wire and tape it? or am I missing something here?

Any help is greatly a[[reciated!
Thanks
Tazman00 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-06-2009, 06:17 PM   #2
Tazman00
Gone Wild
 
Tazman00's Avatar
E-Z-GO
 
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
Default Re: Alltrax 4844AXE install

Got it figured out with the help of ScottyB! Thanks Scotty!
didn't help that I was looking at a marathon wiring diagram ...lol

Basically the FnR switch had the two A2 cables on it. I left the A2 cable from the motor to the FnR switch attached, and removed the cable that went from the FnR switch to the A2 pin on the controller.

Got it installed re programmed and everything seems to be working fine so far!

Thanks again Scotty!
Tazman00 is offline   Reply With Quote
Old 09-06-2009, 06:25 PM   #3
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: Alltrax 4844AXE install

Scares me to help like that but looks like it was pretty staight forward with the aid of the Alltrax online diagram... Glad to hear it works! How is the performance?
scottyb is offline   Reply With Quote
Old 09-06-2009, 06:52 PM   #4
Tazman00
Gone Wild
 
Tazman00's Avatar
E-Z-GO
 
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
Default Re: Alltrax 4844AXE install

yeah, and looking at the right diagram helps!...
pretty much the same on speed. but a noticeable difference in torque.
I have the plum quick motor to install yet..I know..I know it's a plum quick...

I'm gunna give it try anyway and see what I come up with.
Tazman00 is offline   Reply With Quote
Old 09-06-2009, 11:35 PM   #5
Tazman00
Gone Wild
 
Tazman00's Avatar
E-Z-GO
 
Join Date: Jun 2008
Location: Bridgeport, MI
Posts: 392
Default Re: Alltrax 4844AXE install

got the PQ motor installed. noticed a few more MPH nothing drastic maybe 2-3 MPH faster. climbs a lot better tho' more noticeable torque!

I haven't had a chance to play with controller settings yet. might be able to make a few more noticeable changes.

so far I'm happy
Tazman00 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
new Alltrax controller install ? Electric EZGO
Alltrax 4844AXE 400amp Controller Golf Carts and Parts
Alltrax 650 Extreme DC!
Alltrax AXE 650 Golf Carts and Parts
Has anyone used a Alltrax in a G19 Electric Yamaha


All times are GMT -5. The time now is 12:54 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.